Timney trigger

rntim

New member
Joined
Jun 21, 2014
Messages
24
Reaction score
0
Location
Sitka
I have a .300 RUM. I have seen stuff about recalls on the trigger and am wondering if replacing it with a timney trigger is really "that simple" to do myself. Spoke with Remington and its an easy 3-4 months or more to get it back once I send it off to them to repair--that, is not an option!
 

DoughNut

New member
Joined
Aug 1, 2009
Messages
222
Reaction score
10
I recommend timneys to all my customers, it's not difficult but you will probably have to relieve the stock for the trigger to fit. My advice is to get one and read the instructions before you begin, then read them again, then read them again and follow them verbatum!!
I have seen a few rifle fire without pulling the triggers but NEVER on a remington.
 

Laker Taker

New member
Joined
Jun 18, 2009
Messages
433
Reaction score
92
Location
Wasilla
Good luck finding a Timney trigger right now, I gave up and went with a Schilen on my .300 RUM.
 

OKElkHunter

New member
Joined
Jan 22, 2007
Messages
445
Reaction score
22
Location
Alaska
Replacement on remington 700s is simple. You can do it yourself, or you can get one of the local smiths to do it. You can order the timneys pre-set to the pull you want and its only a cpouple of pins to remove to swap the whole assembly out. I have Timney Triggers on all my remingtons, and they are awesome. Order direct from timney http://www.timneytriggers.com/
 
Top