Get a chamber cast in Anchorage

[orangejuicy]

Hello,
A friend has what appears to be something like a 366 Alaskan, 9.3 Sisk or Barnes-Sisk. Wanted to if there are any recommendations to do a good chamber casting in Anchorage. It's a Remington 700 with a .366 bore, 0.540 bolt face, 3.70 mag well, and 3.25 ejection port. No markings at all on the barrel.
Thanks,
oj

 

[Daveinthebush]

I had to look the .336 up. Found this information on it. Maybe Wild West Guns can check it for you.

366 Alaskan and 9.3WSM

Kabluewy and AlleninAlaska, I was reading some archived stuff and wondered how these projects turned out?

forums.outdoorsdirectory.com

 

[orangejuicy]

I had to look the .336 up. Found this information on it. Maybe Wild West Guns can check it for you.

366 Alaskan and 9.3WSM

Kabluewy and AlleninAlaska, I was reading some archived stuff and wondered how these projects turned out?

forums.outdoorsdirectory.com

Yep, those threads were where I found those cartridges as possibilities. This quote did make me chuckle a bit:
“As long as I am taking liberties with opinion, I’ll say that I think the 375 Ruger brass will immediately make obsolete all of the magnum brass as we have known, including the short magnums.”