Accident at Merrill

Float Pilot

Well-known member
Joined
Oct 6, 2006
Messages
4,596
Reaction score
136
Location
Kachemak Bay Alaska
At least one person died when a plane crashed at Merrill Field Wednesday morning, authorities said.

The crash was reported to Anchorage Fire Department at 8:24 a.m. Julie Rychetnik, AFD dispatch supervisor, confirmed a plane was "on the ground."

"We do have one confirmed death," Rychetnik said.

No other details were immediately available.

This is a developing story. Check back for updates.

Contact Devin Kelly at [email protected].

Read more here: http://www.adn.com/2014/07/02/35439...-merrill.html?sp=/99/100/&ihp=1#storylink=cpy
 

Troy Hamon

New member
Joined
Aug 21, 2011
Messages
642
Reaction score
33
http://www.ktuu.com/news/news/ancho...pond-to-plane-crash-at-merrill-field/26763820

Excerpt...

Owner of Lake Clark Air Glen Alsworth heard the plane as it was taking off and went outside to watch it as it began to take off.

"Like any good pilot, I wanted to watch -- you always do," Alsworth said. "As it lifted up at a very steep angle of climb, at about 100 feet, it looked like the angle was so great that the airplane couldn't sustain."

Alsworth watched as he saw the nose pitched over on the plane and it came back down toward the ground, he said.

"It looked like a near-vertical attitude," Alsworth said.
 

trailblazersteve

New member
Joined
Aug 24, 2006
Messages
1,552
Reaction score
122
Location
Eagle River,AK
Havn't officially confirmed it yet but it seems it was a guy that shared a hanger with my friend at Merrill. He rebuilt the plane from the ground up all winter. I was just talking with him last week. As of last week, he hadn't taken the plane out yet for the first flight but was getting ready. Very lame, as he was a real nice guy. RIP..
 

Float Pilot

Well-known member
Joined
Oct 6, 2006
Messages
4,596
Reaction score
136
Location
Kachemak Bay Alaska
If it was just rebuilt, maybe a control cable or surface jammed up.
We had a local Stinson that had a one-way only rudder after being ( fixed up) during an extensive annual. So who knows....
 

AK DUCKMAN

New member
Joined
Aug 28, 2006
Messages
713
Reaction score
25
Location
Wasilla
Charley Was a great guy. I first met him in the late 80s. I had the opportunity to work and hunt with him. He was the kind of guy that would do anything for you, the kind of guy that anyone that knew him was proud to call a friend. You will be truely missed. What saddens me most is I haven't seen him in a long time. he came up in a conversation with my brother and he mentioned Charley had been working on his plane for the last two years. I got to thinking I need to stop and he him sometime, well now thats not going to happen.
 

Grizzly 2

New member
Joined
Jun 8, 2011
Messages
1,509
Reaction score
62
Location
Tennessee
If it was just rebuilt, maybe a control cable or surface jammed up.
We had a local Stinson that had a one-way only rudder after being ( fixed up) during an extensive annual. So who knows....

During a ground-up rebuild of a Super Cub, I found that my mechanic had rigged the elevator trim backwards. Could have been a bad scene on the first takeoff. As they used to say on "Hill Street Blues", be careful out there . . . . .
 

ocnfish

New member
Joined
Oct 16, 2007
Messages
542
Reaction score
18
Location
Alaska
That was a stall type of crash, the most deadly time to fly an airplane is after the annual or a major upgrade or rebuild. At that point you are a test pilot. We do not know what happened here. After we upgraded the engine on my 56 C-180 I took off with a maximum rate of climb and not a maximum angle of climb ..... when in doubt choose air speed.
 

AK DUCKMAN

New member
Joined
Aug 28, 2006
Messages
713
Reaction score
25
Location
Wasilla
During a ground-up rebuild of a Super Cub, I found that my mechanic had rigged the elevator trim backwards. Could have been a bad scene on the first takeoff. As they used to say on "Hill Street Blues", be careful out there . . . . .
After Talking to a fellow worker who has a PA 12, that is what it's looking like to me. I guess it's easy to rig the elevators wrong.
 

pipercub

New member
Joined
Feb 3, 2010
Messages
1,296
Reaction score
51
Location
northern alaska
What a bummer... Double and triple check after assemble....then ask your buddy the IA to come over and look it over...find it on the ground, not in flight....there was a Beaver that crashed on Lake Hood with the ailerons rigged backwards....
 

Mr. Pid

New member
Joined
Apr 25, 2006
Messages
3,294
Reaction score
113
Location
Anchorage
I'll wait for the NTSB report to see what they find. Lots of possibilities. I wouldn't want to be the guy that signed that plane into service. For the accident and the investigation.

I've built a -12 from the ground up. Control travel was a focal point. I don't buy the easy explanation. Most of us lift the tail on the takeoff roll. If my plane didn't respond to my inputs I'd pull power immediately. After all these years I still check controls free and correct prior to every flight.

There's nothing more exciting than a first flight. Every possible scenario of things that could go wrong goes through your mind. Spool up is more deliberate than regular ops. This accident doesn't make sense. They usually don't.

Condolences to the survivors.
 

Grizzly 2

New member
Joined
Jun 8, 2011
Messages
1,509
Reaction score
62
Location
Tennessee
As usual, I agree with Mr. Pid. Still, checking that the controls are "free and correct" won't usually verify proper travel of the ELEVATOR TRIM TAB. Best to do that on the ground, and long before the re-worked airplane is ready for its first takeoff. A cautious pilot, seeing the trim tab indicator showing a takeoff setting, might decide to allow the airplane to take itself off without much control input. Still, it's not unusual to then adjust the elevator trim for a hands-off climb configuration to relieve the necessity for continuing back pressure on the control yoke or stick. It certainly could be the elevator trim rigging, rather than the elevator cable problem. My appraisal, anyway, for what it may be worth . . . . .

Please add my sincere and heartfelt condolences. Truly a tragic accident.
 

Float Pilot

Well-known member
Joined
Oct 6, 2006
Messages
4,596
Reaction score
136
Location
Kachemak Bay Alaska
When I rebuilt the tail of my Cub the trim position indicator was ( of course) in a different position than it had been in previous years. But my IA and I figured out about where the horizontal stabilizers should have been on the jack screw and went from there.

In this case there are far too many things it could have been. Some obvious like a reversed cable, or a non-secured cable that suddenly came off.

Others maybe not so obvious, like a tool left in the fuselage that shifted and jammed a control....

Heck fire, I am sure more than one pilot has had a heart attack in flight... So who knows....

I will wait for the report....
 

pipercub

New member
Joined
Feb 3, 2010
Messages
1,296
Reaction score
51
Location
northern alaska
Yea you wait for the report....In the mean time, if you are test flying an aircraft after major repairs/alterations, don't just hop in and go. Test every system for proper movement, including the trim. Do the brakes work? Do you have good fuel flow? Test the aircraft on the gravel strip with a couple of high speed runs and pull the power back before it flies. Take it back and look for leaks....don't be in a big hurry to fly it... Take the time to find the problems on the ground...
 

Tcraft

New member
Joined
Dec 15, 2009
Messages
190
Reaction score
5
Location
alaska
Now is a good time to talk about this accident...it is fresh in our minds and the knowledge and thoughts we share now we will most likely remember later. More lives will be lost as result our lack of communication.
 

pipercub

New member
Joined
Feb 3, 2010
Messages
1,296
Reaction score
51
Location
northern alaska
Things are a wee bit different when you are in a aircraft just out of extensive maint. Took a J-4 out for the first flight after rebuild. They had painted the fuel selector marks in the wrong position! The engine quit on the first run down the strip...No detents on the old fuel selectors....It is the little over-looked things that get you....
 

Grizzly 2

New member
Joined
Jun 8, 2011
Messages
1,509
Reaction score
62
Location
Tennessee
Things are a wee bit different when you are in a aircraft just out of extensive maint. Took a J-4 out for the first flight after rebuild. They had painted the fuel selector marks in the wrong position! The engine quit on the first run down the strip...No detents on the old fuel selectors....It is the little over-looked things that get you....

Yeah, like my Super Cub complete rebuild: the mechanic dipped a fuel line elbow into his can of Fuel Lube, rather than carefully coating the threads. Blocked fuel flow from that tank, and only discovered when at 5,000' MSL over the mountains . . . . .
 
Top