I am having some trouble with my Glock model 20c. I am sure my problem was a direct result of disassembling my pistol myself in an attempt to upgrade the spring on my firing pin and recoil spring assembly . I replaced the spring on both on account of some advice that my gun needed higher quality springs to better handle the recoil from my reloads. After putting the gun back together my firing pin does not strike my primer with much force at all. It hardly makes a indentation in the primer. I am only getting about 2 or 3 out of about 10 rounds to fire. Anyone out there ran into this problem before? Any advice on how to fix this would be greatly appreciated.