Announcement

Collapse
No announcement yet.

posting a picture

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • posting a picture

    For those that may have been having the same problem as me with pictures being way to large to post I finally (after much searching and toying around with programs) found one that seems to be ok.
    Someone on here had suggested it to me it's called intraview.
    Here are the instructions..
    I go to FILE and open the picture i want to resize then go to IMAGE and under the image drop down menu select the resize/resample and change your size that's highlighted to 600 (because this is the largest size allowed in JPG)
    next go to FILE and click SAVE AS. be sure the box in the bottom middle is checked and that you are saving the picture as a JPEG file this will bring up a screen on the right that will allow you to adjust the detail of your picture. I've found that i need to bring mine down to 30 to make it under the 48.8 maximum file size. click save after you've changed the name so you don't overwrite your original picture. Now click on the picture (this will adjust the settings at the bottom) Now it should show you the file size and if it's under 48.8 you are ready to post. If it does not make it under just reduce the detail again and follow the same steps.

    here's the detailsd from the site I downloaded intraview from.
    Justin

    First of all you will need a graphic viewer/converter program. One of my favorites is IrfanView. You can click here to download it for free.
    Open your jpeg image file in IrfanView
    Next to reduce the file size you have two options:
    You can resize the dimensions of the photo i.e. decrease the (width * height) - recommended if you are emailing it to friends. If you do not want to do this, skip to step 5.
    You can lower the JPEG quality of the photo
    To reduce the dimensions in IrfanView
    Select File > Image Resize/Resample (Ctrl + R)
    Make sure the size method is set to “Resample”
    Make sure the “Preserve Aspect Ratio” option is selected and set to 100
    Now enter the width in pixels you want for the new image and click OK. (For email 1024 width is sufficient, if you want even smaller photo enter 640 for width). Height is automatically determined
    Click “OK”
    To lower the JPEG quality and save the image
    Select File > Save As (or simply press ‘S’ on your keyboard)
    Navigate to the folder where you want to save the file. Do not overwrite your existing file.
    Now from the Save as type dropdown list select JPG - JPEG Files
    Next you can set the quality, If you are not already seeing the JPEG/GIF save options dialog on the right side then select Show options dialog
    Now you can drag the quality slider to somewhere between 65 and 85 based on how much size you want to reduce
    Click Save to apply the settings and create your new image.
    Now open the file in IrfanView you just created. If you are not happy with the new image quality and file size then re-open your original image and repeat the process changing settings as needed.
    Justin

  • #2
    where did yu download from???

    I would like to know.....thanks

    Comment


    • #3
      oopps that would have been helpful

      here ya go.
      http://www.download.com/IrfanView/30...=dl&tag=button
      looks like it's not going to make a link so copy and paste this onto your address bar.
      Good luck
      Justin

      Comment


      • #4
        Thanks..

        let me see if I got it right....my airboat:
        Attached Files

        Comment


        • #5
          Right on!

          Nice boat. Those things always look like alot of fun.
          Justin

          Comment


          • #6
            Test test test
            Attached Files
            "Let every angler who loves to fish think what it would mean to him to find the fish were gone." Zane Grey
            sigpic
            The KeenEye MD

            Comment


            • #7
              more testing
              Attached Files
              "Let every angler who loves to fish think what it would mean to him to find the fish were gone." Zane Grey
              sigpic
              The KeenEye MD

              Comment


              • #8
                pic to large

                when I try the 600 x400 it say it's to big. It says my KB exceeds the limit. what can I do?
                Living the Alaskan Dream
                Gary Keller
                Anchorage, AK

                Comment


                • #9
                  Go smaller.

                  The 600 x 400 is the pixel count... 240,000 or about a 1/4 megapixels.

                  Depending on the quality of the camera/image, the same pixel count may have drastically different file sizes in terms of actual bytes of data. Same 600 x 400 pixels may be anywhere from 30-100 KB in file size.

                  FYI, the pic of my little one is 600 x 442 pixels, but only about 40 KB file size.

                  Look at the file size when you get the "too big" error. That will give you an idea of how much smaller to go with the re-sizing step.
                  "Let every angler who loves to fish think what it would mean to him to find the fish were gone." Zane Grey
                  sigpic
                  The KeenEye MD

                  Comment


                  • #10
                    Your file of 225.1 KB bytes exceeds the forum's limit of 19.5 KB for this filetype. This was a 320. Is there anything else I can do? It seems 19.5 is small
                    Living the Alaskan Dream
                    Gary Keller
                    Anchorage, AK

                    Comment


                    • #11
                      Max image size

                      I have just increased the max jpg size to 50 kb. This will help.

                      My preference is that people use offsite photo locations. This will allow many images to be posted without drawing down resources here.

                      I recognize that some may not be able to use other resources, so we have made it possible to upload images to the forum itself. So far it isn't a space issue, but we'll keep an eye on it.

                      David

                      Comment


                      • #12
                        Originally posted by webmaster

                        My preference is that people use offsite photo locations. This will allow many images to be posted without drawing down resources here.


                        David
                        David

                        I tried using the [img][/img] code to post a pic from a remote site, but instead of the pic coming up in the post, it comes up with only a URL directing you to the remote site. You must click the URL to see the pic.

                        If I upload the pic to your site, then it can be posted as an attachment and shows up as an actual picture in the post.
                        "Let every angler who loves to fish think what it would mean to him to find the fish were gone." Zane Grey
                        sigpic
                        The KeenEye MD

                        Comment


                        • #13


                          OK never mind...

                          I think I just figured out what this button is for.
                          "Let every angler who loves to fish think what it would mean to him to find the fish were gone." Zane Grey
                          sigpic
                          The KeenEye MD

                          Comment


                          • #14
                            I still can't get it to work. It say it's still to big by 19kb
                            Living the Alaskan Dream
                            Gary Keller
                            Anchorage, AK

                            Comment


                            • #15
                              There's things I don't yet understand...

                              Originally posted by fishNphysician
                              David

                              I tried using the [img][/img] code to post a pic from a remote site, but instead of the pic coming up in the post, it comes up with only a URL directing you to the remote site. You must click the URL to see the pic.

                              If I upload the pic to your site, then it can be posted as an attachment and shows up as an actual picture in the post.
                              It's not clear to me why this works for some and not for others. Many people have posted pictures from photobucket or other websites and they show up as images. Others post images and they show up as hyperlinks.

                              I don't understand why it works that way yet.

                              David

                              Comment

                              Footer Adsense

                              Collapse
                              Working...
                              X