Announcement

Collapse
No announcement yet.

454 Casull cartridge boxes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 454 Casull cartridge boxes

    Well, being tired of using zip-lok baggies, I bought some of the recommended MTM P50-44 and P100-44 boxes for my 454 Casull loads, but with the 310 grain and heavier hard cast bullets I favor, the boxes are too "short" to close properly. What have any of you found works well? Thanks

  • #2
    I use this for 454 Also have some older slip top 44/45 boxed that work good.

    Midway USA has two 454 listes:
    One for COL under 1.6"
    One for COL over 1.6".

    460 is where the fun is, they don't fit worth a hoot in anything I have found yet.
    Andy
    On the web= C-lazy-F.co
    Email= Andy@C-lazy-F.co
    Call/Text 602-315-2406
    Phoenix Arizona

    Comment


    • #3
      I've got some of these and they hold my loooong (1.820) 454 435gr loads no prob.

      http://www.ecrater.com/p/7053490/mtm...00-round-flip#


      A gun is like a parachute. If you need one, and donít have one, youíll probably never need one again

      Comment


      • #4
        Sounds good to me, Snyd, thanks. Wonder why the P50-44 boxes wouldn't work. You'd think they would be the same interior height as the P100s, but apparently not. My 330 gr. Stoner loads run out at about 1.753.

        Comment

        Footer Adsense

        Collapse
        Working...
        X