Announcement

Collapse
No announcement yet.

Remington 7600 Fore-end

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Remington 7600 Fore-end

    I have a Remington 7600 and I want to replace the fore-end with a synthetic fore-end. Does anyone know how remove the fore-end? I cannot find anything accurate on how to do this on the internet.

  • #2
    Unless its different than other I've seen just unscrew the nut at the forarm tip and slide it off
    Now left only to be a turd in the forrest and the circle will be complete.Use me as I have used you

    Comment


    • #3
      Originally posted by AMMO View Post
      I have a Remington 7600 and I want to replace the fore-end with a synthetic fore-end. Does anyone know how remove the fore-end? I cannot find anything accurate on how to do this on the internet.
      On mine the nut or screw are only half the story if you want to pull the whole forend including the action bar assembly. You have to unscrew the forend cap screw to remove the wood, but you also need to action tube assembly. To do that cycle the action bar assembly all the way back to expose two holes in the action tube. Stick a screwdriver or punch through those and rotate the action bar and unscrew it.
      "Lay in the weeds and wait, and when you get your chance to say something, say something good."
      Merle Haggard

      Comment


      • #4
        I tried that. I broke the steel punch. Maybe I do have to heat it up to melt the "locktite"? I think that is what it was called?

        Comment


        • #5
          call me at 947-2981 and I will walk you thru it.
          “You’ve gotten soft. You’re like one of those police dogs who’s released in to the wild and gets eaten by a deer or something.” Bill McNeal of News Radio

          Comment

          Footer Adsense

          Collapse
          Working...
          X