Pulling Bearings

[chucktruck]

I'm trying to pull the driveshaft bearings off my sled but don't have a bearing puller. Does anybody know of a way to do this without ruining them.:confused: BTW I have a AC 98' ZR 500

[kenairmk]

Chuck, a puller is not required to remove the driveshaft bearings on that sled, rust is very likely the reason they won't come loose. However, if you go to the trouble of removing the bearings on a 1998 sled, I highly recommend replacing them, as they are not too expensive.

[SuYentna Dave]

Heat the race slightly....I emphasize slightly