Announcement

Collapse
No announcement yet.

New Tundra 300 carb mount

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dirtofak
    replied
    Here is what it looks like when it is not caught and taken care of:



    There are supposed to be grommets in the holes on the bottom!! These studs on the bottom of the float bowl fit in the grommets.



    Inspect your boot while you can.



    Hope this helps.
    Mike

    Leave a comment:


  • BTK
    replied
    In the previous post look right above the 26 on the belt and here is a close-up:

    Leave a comment:


  • BTK
    replied
    pics

    The following is the distant view from left side behind the belt:

    Leave a comment:


  • Cresent Hills
    replied
    carb box

    Thanks for the update... we rode ours 30 miles today and as of yest have not found any issues... please post pics and I will follow up on the airbox.

    thanks

    Tom

    Leave a comment:


  • BTK
    started a topic New Tundra 300 carb mount

    New Tundra 300 carb mount

    Thanks to dirtofAK, I just checked where the airbox is connected to the carb. The hose clamp screw was gone and the "box" was hanging down letting unfiltered air, which had plenty of moisture and belt dust, straight into the carb. This is a new machine with less than 20 hours on it. I found the screw in the pan below the engine, saving me a trip back to Team CC.

    Do you guys think it's worth taking the machine to the dealer to have it documented? I couldn't tell a difference in the way it ran and don't know when the screw came out.

    Crescent Hills, it is worth checking yours. I can post pics if you want.

Footer Adsense

Collapse
Working...
X