Announcement

Collapse
No announcement yet.

1" K-Type Copper water line....Need deal (Cheap)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1" K-Type Copper water line....Need deal (Cheap)

    Ideas on cheapest place to get 1" K-Type copper waterline tubing....? In the 80's it was $165.00 for a 100 foot roll. Summer of 09' it was $995.00 for a 100' roll. So I held off wishing the price would come down.

    So now I need 150' which you can only get 100' rolls in Alaska.

    So where is it available reasonable....??? I guess I could even order it from America, as there is no rush.

    Ferguson's or what ever they call themselves this week was the cheapest last summer.
    "Life Is Either a Daring Adventure or Nothing" - Helen Keller

  • #2
    have you

    thought about plastic a lot of builders have switched to it and now with the shark bite fittings for interior work is easy little more flex if freeze is issue just can't thaw with a welder just a thought and i think it would be cheaper

    Comment


    • #3
      Originally posted by thehappyalaskan View Post
      thought about plastic a lot of builders have switched to it and now with the shark bite fittings for interior work is easy little more flex if freeze is issue just can't thaw with a welder just a thought and i think it would be cheaper

      It is 1/12th the cost. And if I can't find a good price on copper, I'll go with poly.
      "Life Is Either a Daring Adventure or Nothing" - Helen Keller

      Comment


      • #4
        I can get 60' rolls, but I don't stock them this time of year. I have a 100' roll in stock. $1023 for a 100' and a 60' and a union to connect them. I have no idea if this is a good price now or not. Copper prices are on the way down and my supply warehouse could be behind on the price changes. Price is good for a week if you are interested. Soonest I could have the 60' roll is Feb 12th.
        Bunny Boots and Bearcats: Utility Sled Mayhem

        Comment


        • #5
          Originally posted by AKDoug View Post
          I can get 60' rolls, but I don't stock them this time of year. I have a 100' roll in stock. $1023 for a 100' and a 60' and a union to connect them. I have no idea if this is a good price now or not. Copper prices are on the way down and my supply warehouse could be behind on the price changes. Price is good for a week if you are interested. Soonest I could have the 60' roll is Feb 12th.
          I have a account at Ferguson's Wholesale, their price late last fall $585.00 for 100' roll.

          I need to check outside, maybe slow boat shipping.

          Or ten more years of hauling water from the creek.
          "Life Is Either a Daring Adventure or Nothing" - Helen Keller

          Comment


          • #6
            You probably can't find it in Alaska cheaper than at Fergusen if you have an account there. Keller and Pacific might have a lower price, but not usually. Like all commodities, it's all about timing your purchases. In 2007 I purchased a bunch of 1"K at the right time and thumped Fergusen all summer. In 2008 I couldn't beat them. Our M copper prices and fitting prices have dropped significantly the last couple months, but K copper hasn't moved since November. I am stuck with our warehouse cost until they sell out At least I'm still cheaper than Lowes

            Have you thought of going to 3/4" to save a little money. I know it's not code in many places now, but you may not care. I run 3/4" for 100' and I get plenty of water out of it for my 5 person family.
            Bunny Boots and Bearcats: Utility Sled Mayhem

            Comment


            • #7
              Originally posted by AKDoug View Post
              Have you thought of going to 3/4" to save a little money. I know it's not code in many places now, but you may not care. I run 3/4" for 100' and I get plenty of water out of it for my 5 person family.

              I already have the Pit-less adapter for 1 inch. I would save on the tubing and throw away a $65.00 adapter. So net-net for about $50.00 I get to have 1" line. Also the line will serve a barn, and shop building.
              "Life Is Either a Daring Adventure or Nothing" - Helen Keller

              Comment


              • #8
                If you need to connect 2 sections that are buried, you can use a coupling and silver solder. It is a hi strength brazing rod, used in refrigeration systems

                Comment


                • #9
                  Originally posted by thehappyalaskan View Post
                  thought about plastic a lot of builders have switched to it and now with the shark bite fittings for interior work is easy little more flex if freeze is issue just can't thaw with a welder just a thought and i think it would be cheaper
                  I have been doing a bit of research on designing a frost proof plumbing system. I am looking at a pretty long run from the well to cabin so the price of copper may be prohibitive. Although external heat tape and plastic piping dont seem to mix well, I did find an internal heatline that you can install in an insulated poly pipe. See: http://www.heatline.com/ Can't vouch for the product, but it seems like it might work.

                  Cheers

                  Joel

                  Comment


                  • #10
                    Originally posted by Joel in Alaska View Post
                    I have been doing a bit of research on designing a frost proof plumbing system. I am looking at a pretty long run from the well to cabin so the price of copper may be prohibitive. Although external heat tape and plastic piping dont seem to mix well, I did find an internal heatline that you can install in an insulated poly pipe. See: http://www.heatline.com/ Can't vouch for the product, but it seems like it might work.

                    Cheers

                    Joel

                    I have looked at that system, in fact help install one last summer. The two things I will not compromise on in construction are the foundation and the water system. I'll go with Copper, I just don't want to over pay for it.
                    "Life Is Either a Daring Adventure or Nothing" - Helen Keller

                    Comment


                    • #11
                      Originally posted by Hopeak View Post
                      I have looked at that system, in fact help install one last summer. The two things I will not compromise on in construction are the foundation and the water system. I'll go with Copper, I just don't want to over pay for it.
                      Other than the inability to thaw it with as welder is the poly pipe an inferior product?

                      Comment


                      • #12
                        Originally posted by Joel in Alaska View Post
                        Other than the inability to thaw it with as welder is the poly pipe an inferior product?

                        Yes, People tell me that it can just break for no reason, maybe age. PVC can break from freezing expanson. For me the Moblization cost just to get a excuvator here is $1,100 each way. I just want to reduce the risk of a do'over.
                        "Life Is Either a Daring Adventure or Nothing" - Helen Keller

                        Comment


                        • #13
                          Interior heat lines usually run more than the cost of the copper line itself. The last section I bought was over $6/ft.
                          Bunny Boots and Bearcats: Utility Sled Mayhem

                          Comment


                          • #14
                            Pex?

                            I installed Pex thoughout the entire lodge last summer. After much research, I found it to be a far superior product (at least on paper) tests showed the stuff bulged from freezing to the size of a golf ball, but once thawed, it goes back to it's original size. No problem as of yet. But that's just the way I went. It was about a 10th the cost of if I had gone with copper, plus with copper you have a lot more labor. Pex is so easy, even I was able to do it without burning the place down!
                            Experience Real Alaska! www.alpinecreeklodge.com

                            Comment


                            • #15
                              The problem with Pex for the line from the Waterwell to the building is that you can not thaw it if it freezes.

                              Also Pex can not be exposed to sunlight.
                              "Life Is Either a Daring Adventure or Nothing" - Helen Keller

                              Comment

                              Footer Adsense

                              Collapse
                              Working...
                              X