Announcement

Collapse
No announcement yet.

Adult damsel body SBS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Adult damsel body SBS

    Allright here you guys go sorry it took long. The pictures are also shi**y. After making this i relized that if you put it together to tight it doesn't wont to slide off the needle, so i took some wax paper(cookie sheet) and put around the needle then laid the base of my thread down. The paper is not in the SBS
    1. Lay down your thread evenly to the end of the needle or length of the body you want.
    2. Take a piece of 30 pound mono and wrap your thread over it to the end of the needle make sure not to get any lumps or bumps on the body.
    Attached Files

  • #2
    pictures are backwards.
    3. Take your moms scrap booking stitching thread and tie it in back towards the vise.
    4 Lay down a thin coat of zap-a-gap and then wrap your blue thread over the glue to the end of the needle. The glue keeps the body from falling apart. Tie it off and whip finish.
    Attached Files

    Comment


    • #3
      5. Now take a sharpie and make your black strips on the body.
      6. slide the body of the needle you may have to pull hard, once the body is off the needle cut both ends of mono and glue the ends so they don't fall apart then your done. Any questions feel free to ask.
      Attached Files

      Comment


      • #4
        Originally posted by Matt24 View Post
        5. Now take a sharpie and make your black strips on the body.
        6. slide the body of the needle you may have to pull hard, once the body is off the needle cut both ends of mono and glue the ends so they don't fall apart then your done. Any questions feel free to ask.
        Well done, and good info...
        Rep + 1.
        "If our father had his say, nobody who did not know how to catch a fish would be allowed to disgrace a fish by catching him." -A River Runs Through It

        Comment

        Footer Adsense

        Collapse
        Working...
        X