Motor repair shop for 25hp jet foot impeller jet work over

[Trakn]

I have an older jet and I'm looking for a shop on the Kenai or Anchorage area that would repair the impeller and check the specks on the shaft spacing and give it the once over. Looking for a shop name to bring it to.

[JEH97LX]

Jet boat parts and services seem a bit scarce in Anchorage, but there are a couple options I've found. I've used Professional Marine https://www.professionalmarineak.com/ a couple times to check out my engine and replace a couple impellers and housings on a Hamilton 753 jet.

For an alternative, I've heard that Alaska 4x4 https://www.alaska4wheeldrive.com/Alaska-Marine provides jet boat services, but I've never used them.

[JetPow]

https://www.alaska4wheeldrive.com/Alaska-Marine[/URL] provides jet boat services, but I've never used them.

I'd keep it that way

[kk alaska]

Take your impeller in and get it rebuilt I would rebuild it myself so you have the tools and supplies to repair it in the field. Nothing worse than to rock it in the field and not have the tools and experience to repair it and get it home.

[CapnMike]

I'd keep it that way

I'll 2nd this recommendation!!

[south coast stu]

Here's a couple of references if you want to learn to shim and sharpen yourself. Not that hard.
http://outboardjets.com/download/mis...NG%20EDGES.pdf
http://outboardjets.com/download/Imp...20Shimming.pdf