Announcement

Collapse
No announcement yet.

Windlass Loosing Traction

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kenai Boater
    replied
    capstan head? could it be the type of line that is too slick to get traction on the head. I would give Potbuilders idea a try.

    Leave a comment:


  • chico99645
    replied
    Originally posted by Cap'n Ron View Post
    What size line/rode are you using, should be at least 1/2 inch. Also, why not use 3,4 or even 5 wraps of line around the uh, ah, um...dangit, now i can re what it's called, davit?? The thinner the line, the more wraps you have to use. You should only have to maintain moderate tension on the line, not have to exert any effort...
    My line is 5/8th I believe. Its the roll of line that Deweys throws in with the package. When I put more than wraps, it keeps trying to jump up the rubber barrel on the side against the plastic housing. I will rough it up as Steve suggested and hope it works.

    Leave a comment:


  • Cap'n Ron
    replied
    What size line/rode are you using, should be at least 1/2 inch. Also, why not use 3,4 or even 5 wraps of line around the uh, ah, um...dangit, now i can re what it's called, davit?? The thinner the line, the more wraps you have to use. You should only have to maintain moderate tension on the line, not have to exert any effort...

    Leave a comment:


  • chico99645
    replied
    Thanks Steve. I'll give that a try.

    Leave a comment:


  • potbuilder
    replied
    roughen up the surface that is in contact with the rope. Coarse sandpaper or maybe even a easy touch with a grinder??

    Leave a comment:


  • chico99645
    started a topic Windlass Loosing Traction

    Windlass Loosing Traction

    I was reading a threat on Brutus pot pullers in the fishing forum about them loosing traction when I reminded me of my Lame Windlass. I have the basic traditional Windlass that Deweys puts on their boats. Wish like heck I would have paid a few bucks more and upgraded. My windlass has the rubber thingamajiggy (rubber barrel) that you wrap the line around and step on the foot switch to activate. Unfortunatly, you have to keep alot of tension on the line to pull the anchor. Its basically just helping you pull the anchor. I've tried one/two and three wraps and it still slips. Does anyone else have this problem and can anyone provide a suggestion other than buy a better one, pull by hand and quit whining, or use my bouy system like I use to in my old boat?

Footer Adsense

Collapse
Working...
X