Announcement

Collapse
No announcement yet.

Replacing motor in jet boat

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Replacing motor in jet boat

    I've got a 28' jet boat with twin GM 4.3 motors. One is a vortec and the other one burned up. The cylinder wall is all tore up. I had the heads rebuilt thinking that might gain me more motor life but no. So I'm looking to replace the blown motor and I'm just looking for some ideas.

  • #2
    When the heads were off the inspection revealed damaged cylinder walls?

    If you just had the heads done. Short block it.
    I don't mean to sound bitter, cold, or cruel, but I am, so that's how it comes out.
    Bill Hicks

    Comment


    • #3
      A brand new drop in 5.7 was quoted to me for 2550 and 500 in shipping to Anchorage. A short block wouldn't cost you more then 1500 shipped from the lower 48 and you would basically have a new engine sitting in there if you just had your heads done.

      Comment

      Footer Adsense

      Collapse
      Working...
      X