Announcement

Collapse
No announcement yet.

What is the best pot puller?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What is the best pot puller?

    So what does everyoen use for a pot puller. i have one of the standard ones from Dewey's, but its pretty slow on those 1200ft pulls. What is everyone else using out there?

  • #2
    Power Winch

    I just bought the new one from Power Winch this year, made a braket so it slips on the gunnel and plugs in. When not in use I put it under a seat. It has worked great and less expensive if you shop around.


    Quick Catch Pot Puller

    Load Pounds
    Line Speed
    50 lbs
    175 (ft/min)
    100 lbs
    150 (ft/min)
    150 lbs
    120 (ft/min)
    Average 12V current draw
    @ 100 lbs = 43 amps

    Up to 200 pounds of pulling power!

    Our Quick Catch Pot Puller is perfect for fast, safe and easy retrieval of lobster or crab pots with a fast retrieval speed of 150' ft/minute. Electrical power assist retrieves pots in less than two minutes!
    • Fast 150'/min retrieval with 100 lb load
    • 200 lb max pull rating
    • Twice as fast as the 300
    • Low current motor draw
    • Easy to operate foot control
    • Handles unlimited rope lengths
    • Stainless steel internal shafts, fasteners and hardware
    • All aluminum housing, e-coat primer with a powder topcoat
    • Two year limited bow to stern warranty
    Part # P77769
    Sugg. retail: $799
    Wiring & Installation kit (Sold separately) Part # P55600
    Sugg. retail: $189
    Order Wiring Kit Online
    sigpic2003 220 Hewescraft Sea Runner 115 Yam'y, Soft Top "Schmidt Happens"

    Comment


    • #3
      Could you post a picture of how you mounted it to the gunnel?
      Thank you

      Comment


      • #4
        Mounting Pot Puller

        I have already put the boat away and didn't have any pic's in use. I took these to help show what I did.
        I fabricated a aluminum bracket that bolts to the existing bolt pattern on the puller frame. then welded the drop down piece with the anlge piece. To mount it I tip it down and it hooks unded the gunnel lip and lays flat on the surface. Can't fall over and tension only pulls in your favor. When done just unplg and tip back off. Works with a push button that is mount fluch beside it and can work with my knee while I feed the rope in a tote.
        You could aslo bolt some thing to the gunnle to mount to. Hope this help with the visual?

        I will send 2 more pics
        sigpic2003 220 Hewescraft Sea Runner 115 Yam'y, Soft Top "Schmidt Happens"

        Comment


        • #5
          More Pot puller pics

          Here are a couple more pics
          Last edited by Queen of Kings; 05-13-2007, 17:30.
          sigpic2003 220 Hewescraft Sea Runner 115 Yam'y, Soft Top "Schmidt Happens"

          Comment


          • #6
            Cool beans! Looks like a great system and easy to disconnect.

            Comment


            • #7
              Here the other pics again

              Lost the first pics so here they are agian
              Last edited by Queen of Kings; 05-13-2007, 17:30.
              sigpic2003 220 Hewescraft Sea Runner 115 Yam'y, Soft Top "Schmidt Happens"

              Comment


              • #8
                Pot puller

                I also used a 8 guage wire plug from West marine. The kind that are used for trolling motors. Works slick
                sigpic2003 220 Hewescraft Sea Runner 115 Yam'y, Soft Top "Schmidt Happens"

                Comment


                • #9
                  I'm happy

                  I made the same bracket and installed the same unit with similar switch. Seems like it was around $400 or so for the unit + wiring and switch. This unit is nice because it is so compact. Thought it would be nice to have a davit arm but I don't think its really necessary. As mentioned before, shop around no matter what you decide to get.

                  Comment


                  • #10
                    Originally posted by hunterdad View Post
                    So what does everyoen use for a pot puller. i have one of the standard ones from Dewey's, but its pretty slow on those 1200ft pulls. What is everyone else using out there?
                    I think I need to get more line and go deeper! 600 sounds shallow now!
                    ... aboard the 'Memory Maker' sigpic Making Memories one Wave at a Time!

                    Comment


                    • #11
                      My boat was originally owned by a guy how crabbed for tanners and came with a pretty good set up. It's an 11hp Honda which drives a hydraulic pump, you can see it in this picture...



                      ...which powers the puller in this picture...



                      It's strong, and fast, but a bit noisy.

                      Comment


                      • #12
                        Shrimpies...



                        Comment

                        Footer Adsense

                        Collapse
                        Working...
                        X