Announcement

Collapse
No announcement yet.

Kicker for SeaSport 2400XL

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kicker for SeaSport 2400XL

    I have a SeaSport 2400XL powered by a 250HP outboard on a swim platfrom and I'm wondering if I need a 25" shaft or can get by with a 20" shaft kicker motor.

  • #2
    Are you mounting it on the swim platform also, or next to it on a transom mount that goes up and down? ( I took a swell over the engine cover from a ferry once and mine is a long shaft on a mount that goes up and down, Sea Sport also.)

    Comment


    • #3
      We have a 25 on our XL and in semi rough water you can still occassionly hear some cavitation as the boat goes up and down. I would not go any shorter than a 25.

      Comment


      • #4
        You won't regret going with a 25" shaft.

        Comment


        • #5
          Ditto, the longer the better..
          On my 2400 Explorer the kicker is on a hydraulic lift and I usually end up dropping it way down to keep the prop in the water.
          Live life and love it
          Love life and live it

          Comment


          • #6
            Going with a 25".

            Thanks to all who responded. Sorry for the slow response from me. I'm new to the Forum and still figuring it out.

            Comment


            • #7
              I was planning on putting it on the integral kicker mount built into the swim platform. I'm concerned though if it will drag when tilted up while I'm getting on step.

              Comment

              Footer Adsense

              Collapse
              Working...
              X