Announcement

Collapse
No announcement yet.

Lesson learned with aluminum impellor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lesson learned with aluminum impellor

    I normally use a stainless impeller but switched to an aluminum one after the river season to run in the salt lagoons, normally no scarping bottom. Well I ran up the river and scraped a little and sucked up some of the bottom, I decided to check the impeller and had to get creative on removing it! A come along, a rope tied to the impeller, sledge hammer and a truck bumper is what it took to get the dang thing off. Just a FYI.
    Providing trips for multilpe species for over 20 yrs
    www.kodiakcombos.com

  • #2
    Salt water eats aluminum

    Comment


    • #3
      We can't use aluminum cam locks in our brine facility at work for the same reason your prop was so difficult to remove it does something to the metal almost fusing parts together turns into hammers and frustration and broken parts

      Comment

      Footer Adsense

      Collapse
      Working...
      X