Announcement

Collapse
No announcement yet.

Single ZF, Duel Blade Pod with only 15gph!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • AKBassking
    replied
    Originally posted by Dupont Spinner View Post
    The Pod has been around for a while. Needs lots of draft. The hole in the bottom of the boat is actually less then what it takes to mount an outdrive unit, most of what you see is reinforcement plate. Seen one on a trailer 2 years ago and got to do a close up investigation. It's made for bigger boat applications and ones not normally trailered.
    But that could change with a single pod, if they can keep the cost down.

    Leave a comment:


  • Dupont Spinner
    replied
    The Pod has been around for a while. Needs lots of draft. The hole in the bottom of the boat is actually less then what it takes to mount an outdrive unit, most of what you see is reinforcement plate. Seen one on a trailer 2 years ago and got to do a close up investigation. It's made for bigger boat applications and ones not normally trailered.

    Leave a comment:


  • russiarulez
    replied
    Cool setup, but wouldn't want to hit a rock with that, could take out the whole pod leaving you with a large hole.

    Leave a comment:


  • AKBassking
    started a topic Single ZF, Duel Blade Pod with only 15gph!

    Single ZF, Duel Blade Pod with only 15gph!

    This will be cool once offered on boats....

    http://www.boattest.com/engine-revie...2800-Pod-Drive

Footer Adsense

Collapse
Working...
X