Results 1 to 3 of 3

Thread: Some MOd's to my 08 Ranger 6 x 6

  1. #1
    Member Queen of Kings's Avatar
    Join Date
    Aug 2006
    Location
    Wasilla
    Posts
    560

    Default Some MOd's to my 08 Ranger 6 x 6

    I couldn't find where I could by some 1//2 doors so I made my own from some 3/16" alum plate, hinges and latch. Also my roll bar was too tall to go in my enclosed tralier, so I cut it and hinged it so I can just pull the back pins, roll the top forward to my front rack, and load in trailer, unload and lift top back on and pin it. Each cut I machined a rounded alignmentt pin and welded these in to hold the alignment and strenght. Hope you can see the pics.
    Attached Images Attached Images
    2003 220 Hewescraft Sea Runner 115 Yam'y, Soft Top "Schmidt Happens"

  2. #2
    Member Queen of Kings's Avatar
    Join Date
    Aug 2006
    Location
    Wasilla
    Posts
    560

    Default Here are the hinged top pics

    Couldn't load them above
    Attached Images Attached Images
    2003 220 Hewescraft Sea Runner 115 Yam'y, Soft Top "Schmidt Happens"

  3. #3
    Member junkak's Avatar
    Join Date
    Jun 2007
    Location
    Anchorage
    Posts
    727

    Default

    Nice! I like the half doors. Always thought that might keep some of dust from sweeping into the cab when running dirt roads.

    Normally I would be worried about cutting a rollbar but from '09 and back the rollbars are weak and fold upon pressure. Polaris added certified (racing) rollbars in 2010.

    Must be nice to be working on your machine. All my toys are stuck at the cabin till the ground firms up.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •