I may have some damage to my cam seats and need a valve adjustment. Can anyone recomend a good repair shop in Fairkanks or near by area. I have the motor out so it will save on labor charges. This is a over head cam 4 valve air/oil cooled motor. I pulled the valve cover off and noticed scratches on the end of the cam both sides and where the cam is seated top and bottom. It has been running fine but it was making more valve noise than it should. I got the motor hot and I think the oil broke down and did not lube properly. I was using Valvoline atv oil and do change it regulary. I hope we can polish the scraches out adjust the valves and be good to go. So any recomdations will be appreciated.