Results 1 to 5 of 5

Thread: Trailer Modification... is it possible

  1. #1

    Default Trailer Modification... is it possible

    My current trailer is an older caulkins trailer with keel rollers and 2 bunks. Is it possible to have the keel rollers removed and simply run with 4 bunks and who would you have complete the work?

    Thanks!

    dan

  2. #2
    Member JOAT's Avatar
    Join Date
    Aug 2007
    Location
    Soldotna, ALASKA since '78
    Posts
    3,720

    Default

    Yes. Pretty simple change that any welder can take care of with some lumber and a few chunks of angle iron. Some keel rollers are usually no big deal. You can probably just leave them in place and add a bunk to either side if you have room to slide a piece of lumber into the gap. If there's no room, you'll have to adjust the existing bunks upward enough to make room to add the new bunks.
    Winter is Coming...

    Go GeocacheAlaska!

  3. #3
    Member alaskabliss's Avatar
    Join Date
    Jul 2008
    Location
    Wasilla
    Posts
    1,419

    Default

    Just a suggestion. I wouldn't use wood and carpet for the bottom bunks. Plastice or P-Tex slides better and won't rot

  4. #4

    Default Thanks!

    Seeing as CAC has the boat right now, I'll see if they can redo the bunks when they sling it.

    dan

  5. #5

    Default

    or ask aurora trailers to do it 336-9111

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •