help with adjusting skidoo 550 carbs
ok, put new throttle linkage on my exp. sport, 2007 or so...
how do i adjust the linkage that goes into the top of the carb caps? i was told to hold throttle open, then adjust til both pistons were level at teh top of the manifold, wide open, opening adn moving together?...soemone else said ot use a drill bit to measure something?
also, each piston has a 4 inch needle in it and they seem loose enough to rotate when the machine is moving?...should these be tightened, or, are they adjusted to a certain depth?