Results 1 to 4 of 4

Thread: 2006 500 X2 Oil Change Question

  1. #1
    New member
    Join Date
    Sep 2009
    Posts
    2

    Default 2006 500 X2 Oil Change Question

    I have drained the oil tank and the engine crankcase, but I did not disconnect the lower oil delivery hose because it was too difficult to disconnect. Do I still have to go through the oil pump priming procedure? I am still trying to access the oil delivery hose connection. Any tricks? I have removed the battery and am going to remove the battery tray and it looks like I will have better access.

  2. #2

    Default

    Do not worry about clean the screen in the pick-up. You should prime the pump just so you know it si getting oil. call hatcher pass polaris if you have any more questions

  3. #3
    New member
    Join Date
    Sep 2009
    Posts
    2

    Default How do I prime the pump?

    Thanks for your reply. How do I prime the pump?

    Quote Originally Posted by hurricaneride View Post
    Do not worry about clean the screen in the pick-up. You should prime the pump just so you know it si getting oil. call hatcher pass polaris if you have any more questions

  4. #4

    Default

    Squeze off the vent on the top of the oil tank, before the slice in the line. Start machine run for 10 to 20 sec. release vent.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •