Results 1 to 3 of 3

Thread: Need some "old" Barnes manual info pls. Pre-triple shock (reloading man. #3?)

  1. #1
    Member mainer_in_ak's Avatar
    Join Date
    Sep 2008
    Location
    Delta Junction
    Posts
    4,078

    Default Need some "old" Barnes manual info pls. Pre-triple shock (reloading man. #3?)

    Hello all, I seem to have misplaced my Barnes manual and need some info on the 9.3x62 mauser using the 286 grain x-bullet. I have about 200 of them left over that I'd like to load them up but without the that older manual I won't be able to. I was hoping that someone wouldn't mind pulling out that paticular manual and relay some info on what the top three velocity producing loads were, what powder and primer the manual lists and what the velocity of the top three loads were. If anyone could relay some of this info on this thread I'd greatly appreciate it. Thanks.

  2. #2
    Member 1Cor15:19's Avatar
    Join Date
    May 2009
    Location
    Dillingham, AK
    Posts
    2,482

    Default

    Quote Originally Posted by mainer_in_ak View Post
    Hello all, I seem to have misplaced my Barnes manual and need some info on the 9.3x62 mauser using the 286 grain x-bullet. I have about 200 of them left over that I'd like to load them up but without the that older manual I won't be able to. I was hoping that someone wouldn't mind pulling out that paticular manual and relay some info on what the top three velocity producing loads were, what powder and primer the manual lists and what the velocity of the top three loads were. If anyone could relay some of this info on this thread I'd greatly appreciate it. Thanks.
    Barnes Manual #3

    9.3X62
    Norma Cases
    Federal GM 210M--primers

    There are only five powders listed with the 286 Grain XFB and Solid:

    H380 52.0 2276--56.0 2451
    H414 53.0 2336--57.0 2512
    IMR 4895 49.0 2219--53.0 2400
    IMR 4064 50.0 2242--54.0 2421
    IMR 4350 56.0 2312--60.0 2477

    The heaviest loads here are listed as maximum in the manual. Barnes recommends IMR 4895 & IMR 4064 for what it's worth. I hope this is what you were hoping to see.

  3. #3
    Member mainer_in_ak's Avatar
    Join Date
    Sep 2008
    Location
    Delta Junction
    Posts
    4,078

    Default

    Thanks for the taking the time to post that reloading info for me, ur a great guy.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •