Results 1 to 14 of 14

Thread: engine work

  1. #1
    Member
    Join Date
    Feb 2009
    Location
    eielson afb
    Posts
    43

    Default engine work

    im not sure if this were i want to post this but i need a cylinder bored out on my atv does any one have a any recomendtions on shops in the fairbanks area

  2. #2
    Member
    Join Date
    Jun 2009
    Location
    NoPo
    Posts
    60

    Default

    I sized my blaster a few weeks ago. I sent my jugg over to Darby's Performance Machine for a bore job. Great guy, great work and quick turn around. I defiantly recommend him to anyone.

    3006 Industrial Ave
    Fairbanks, AK 99701-7461

    (907) 451-0272

    What quad is it for? is it sized or just old and tired?


  3. #3
    Member atvalaska's Avatar
    Join Date
    Nov 2007
    Location
    camp-go-4-beer fbks
    Posts
    630

    Default

    Darby's period.
    WHEN IN DOUBT> THROTTLE OUT.......

  4. #4
    Member theultrarider's Avatar
    Join Date
    Mar 2009
    Location
    Soldotna
    Posts
    1,096

    Default

    Darby's went waaay out of their way to take care of me a few years ago. I sure owe them a plug here.

  5. #5

    Default Same question for Anchorage then??

    Anyone good locally or should I mail it to Fairbanks?
    Mike
    Mike
    www.alaskaatvclub.org
    There is a faster way off the mountain, might hurt a little though.

  6. #6
    Member theultrarider's Avatar
    Join Date
    Mar 2009
    Location
    Soldotna
    Posts
    1,096

    Default

    Quote Originally Posted by Mike Echo View Post
    Anyone good locally or should I mail it to Fairbanks?
    Mike
    Anchorage Drag Bike!

  7. #7
    Member
    Join Date
    Jun 2009
    Location
    NoPo
    Posts
    60

    Default

    Quote Originally Posted by northpoleguy View Post
    I sized my blaster a few weeks ago. I sent my jugg over to Darby's Performance Machine for a bore job. Great guy, great work and quick turn around. I defiantly recommend him to anyone.

    3006 Industrial Ave
    Fairbanks, AK 99701-7461

    (907) 451-0272

    What quad is it for? is it sized or just old and tired?
    oops spelled seized wrong. But really darby's is the guy to go to.


  8. #8
    Member TWB's Avatar
    Join Date
    Apr 2006
    Location
    Wasilla
    Posts
    3,573

    Default

    Smell engines, Darby's in FBX, Anchorage Drag Bike for ANC. Hands down, these guys know their **** and get the job done
    We do not go to the green woods and crystal waters to rough it, we go to smooth it. We get it rough enough at home; in towns and cities; in shops, offices, stores, banks anywhere that we may be placed

  9. #9
    Member
    Join Date
    Feb 2009
    Location
    eielson afb
    Posts
    43

    Default

    thanks for the help guys i will go talk to darbys

  10. #10
    Member crazyatvman's Avatar
    Join Date
    Sep 2008
    Location
    wasilla
    Posts
    36

    Default

    i know one in wasilla is valley machine by pittman road they did bore on my son banshee cylinder they did good job and reasonable price

  11. #11
    Member
    Join Date
    Feb 2009
    Location
    eielson afb
    Posts
    43

    Default

    its 04 400ex and i was just tired and wore out im goin ot make it a 416 i did call darbys and they said im looking at 100 bucks for the bore job

  12. #12
    Member
    Join Date
    Jun 2009
    Location
    NoPo
    Posts
    60

    Default

    Quote Originally Posted by chillytater View Post
    its 04 400ex and i was just tired and wore out im goin ot make it a 416 i did call darbys and they said im looking at 100 bucks for the bore job
    Hvae fun on the 416! make sure you get a good cam to match your set up, what exhaust are you running with it?


  13. #13
    Member
    Join Date
    Feb 2009
    Location
    eielson afb
    Posts
    43

    Default

    WOW darbys is great thanks alot guys i took my jug in friday the 31st and had it back on thrusday the 6th with them haveing to order the piston and gaskets their price was better then any thing i could find on ebay or anywhere else for that matter as far as parts go just awsome guys over there they have my sealed all of my small engine work for the rest of time im here

    i am running a wiseco 10:1 comp with hot cams stage 2, rejetting, crf450 timing chain, not sure on a pipe yet well have to wait until i get the bank built up again. it is goin to be one of those never ending projects hope to have it put back together and running this weekend cant wait.

  14. #14
    Member greythorn3's Avatar
    Join Date
    Sep 2006
    Location
    Chasin the ladys! away!
    Posts
    2,507

    Default

    what ever you do, dont take it to anyone in the valley.
    Semper Fi!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •