Results 1 to 2 of 2

Thread: 05 thur 07 KING QUAD spring/load helper

  1. #1
    Member atvalaska's Avatar
    Join Date
    Nov 2007
    Location
    camp-go-4-beer fbks
    Posts
    630

    Thumbs up 05 thur 07 KING QUAD spring/load helper

    I did this and it works great! the 1st few years "kings" had too fast / to soft of spring rate for the "loads "we have ( the 08 750 they fixed it with a slower /firmer spring) i used a 1" thick pc of UHMW and Made what looks like 4 donuts , and installed them between the spring keeper/plastic insert of the shock (u have to take shock off and remove spring and etc) it WILL raise your wheeler up a bit,frim up the ride .I now run 2 clicks up in the rear and one in the front with a regular load (my 6'&275lbs). i can post how to go about this if there's some intrest. it takes about 2 hours start to finsh if you had a few tools and some "know how"
    WHEN IN DOUBT> THROTTLE OUT.......

  2. #2
    Moderator LuJon's Avatar
    Join Date
    Mar 2007
    Location
    Palmer, AK
    Posts
    11,415

    Default

    Given that there is another post on the mushy KQ suspension I think there is definately some interest.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •