Results 1 to 11 of 11

Thread: Boat top pieces

  1. #1
    Member Fisherwoman's Avatar
    Join Date
    May 2009
    Location
    Wasilla
    Posts
    17

    Default Boat top pieces

    Our Weldcraft Renegade top has a broken piece and we can't find what we need. The piece is the end cap of one of the bars that connects to the boat with a pin. We've found some endcaps online, but they're plastic or round. We need a square metal piece.

    Any suggestions on where to look would be appreciated. Thanks.

  2. #2
    Moderator bkmail's Avatar
    Join Date
    Apr 2006
    Location
    Palmer, AK.
    Posts
    4,124

    Default Greatland welding...

    He can fabricate one for you?!
    He's 1/2 mile East of 3 Bears on the Palmer-Wasilla.
    BK

  3. #3
    Member Akgramps's Avatar
    Join Date
    Apr 2008
    Location
    Last civilized place on the planet
    Posts
    2,080

    Default

    Check with Silverstreak behind west marine, or Nomar in Homer
    “Nothing worth doing is easy”
    TR

  4. #4
    Member Fisherwoman's Avatar
    Join Date
    May 2009
    Location
    Wasilla
    Posts
    17

    Default

    No go with Silverstreak - the lady there didn't even know what we were talking about. I'll give a call into Greatland and see if he can help - Thanks!

  5. #5
    Member c-bolt's Avatar
    Join Date
    Jun 2006
    Location
    Wasilla
    Posts
    371

    Default

    Greatland Welding is great and all, but.................

    I have some spares I bought for my old renegade. Yours wouldnt happen to be a red one (2002, 4.3 redline, AT309) purchased from a guy named Joe (me) would it? I meant to give them to the folks that bought mine, but I would be happy to help a fellow Alaskan out...

    I will be back to AK early next week and would be more than happy to give them away

    You need the part that rivets into the square frame right? I think I have 3 - 5 of them left. I was going to replace all of them before I sold my boat, but I never got around to it. All I have to do is find em

    Joe

  6. #6
    Member Fisherwoman's Avatar
    Join Date
    May 2009
    Location
    Wasilla
    Posts
    17

    Default

    Joe - thanks. I PMed you Mark's number to call when you find the pieces.

    You rock!

  7. #7
    Member
    Join Date
    Apr 2008
    Location
    Homer
    Posts
    40

    Default

    NOMAR down in Homer has all the pieces, parts and tubing in both stainless and nylon. They can bend bows as well. http://www.nomaralaska.com/boatshop.htm

  8. #8
    Member c-bolt's Avatar
    Join Date
    Jun 2006
    Location
    Wasilla
    Posts
    371

    Default

    You're welcome!

    Nothing is better than free stuff. Ill call next week

  9. #9
    Member dbull66's Avatar
    Join Date
    Jun 2006
    Location
    Palmer
    Posts
    51

    Default Renegade

    Quote Originally Posted by c-bolt View Post
    Greatland Welding is great and all, but.................

    I have some spares I bought for my old renegade. Yours wouldnt happen to be a red one (2002, 4.3 redline, AT309) purchased from a guy named Joe (me) would it? I meant to give them to the folks that bought mine, but I would be happy to help a fellow Alaskan out...

    I will be back to AK early next week and would be more than happy to give them away

    You need the part that rivets into the square frame right? I think I have 3 - 5 of them left. I was going to replace all of them before I sold my boat, but I never got around to it. All I have to do is find em

    Joe
    I think you are talking about me..... You live off church rd right...
    Donnie
    Last edited by dbull66; 06-19-2009 at 22:59. Reason: put my name in.

  10. #10
    Member c-bolt's Avatar
    Join Date
    Jun 2006
    Location
    Wasilla
    Posts
    371

    Default

    Donnie....Yep, thats me! I like your avatar

    Here is an update:

    I just got home this afternoon, and found 4 of the little end pieces. Since I found Donnie, I'll split the lot between the two if thats OK. Unless Donnie doesn't want any.

    I found the place I originally bought them from in WA if anybody needs more....

    http://www.knightpartsonline.com/html/photo_gallery.html

    Joe

  11. #11
    Member c-bolt's Avatar
    Join Date
    Jun 2006
    Location
    Wasilla
    Posts
    371

    Default

    Oops, link is messed up...and no edit feature.

    Try again

    http://www.knightpartsonline.com/htm...o_gallery.html

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •