Results 1 to 4 of 4

Thread: Skidoo Tundra R paddle track and seat mod

  1. #1
    Member ruvimarrow's Avatar
    Join Date
    Jan 2008
    Location
    Delta Junction
    Posts
    94

    Default Skidoo Tundra R paddle track and seat mod

    here some photos of my custom tundra
    i did a poor camo job then i put a paddle track on it inch 1 1/4.
    they dont even sell paddle tracks for tundra so i had some lathe work done and got track from a biger skidoo.
    i then geared it down and did clutch work to make it a beast.

    then i made the seat open to side with aluminum makes siting more comfortable and extra storage space.
    Attached Images Attached Images

  2. #2
    Member ruvimarrow's Avatar
    Join Date
    Jan 2008
    Location
    Delta Junction
    Posts
    94

    Default another mod

    here is onother pic
    notice in pic of the windsheild the thin althread i put up to keep windsheild from bucking when going fast on highway
    next up is to eventualy strip the cheap camo job and do it right with preplastic stuff to get paint to hold.
    Attached Images Attached Images

  3. #3
    Member byrd_hntr's Avatar
    Join Date
    Oct 2006
    Location
    Squarebanks
    Posts
    661

    Default ??

    What size track did you put on it (width), and what exactly did you do to the track to make it with with the lathe? Nice mod though. You might post it over at dootalk.com (in the Tundra section) those guys do all kinds of cool mods.

  4. #4
    Member ruvimarrow's Avatar
    Join Date
    Jan 2008
    Location
    Delta Junction
    Posts
    94

    Default

    I believe this track came off a freinds 583 skidoo sumit
    its a 136 inch long track
    the lathe work my Dad and i did was for the rollers on bottom becuase the tundra track is unique in size. and the weeles would have hit the rubber grippers on the inside of track.
    siply what we did with the lathe was stick the rods holding the weels and lathed the aluminum down to were we could slide the wheels closer

    also had to replace the front track pullers in tunnel put smaller size so it would fit in tunel

    kinda hard to explain

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •