Results 1 to 5 of 5

Thread: New Tundra 300 carb mount

  1. #1
    Member
    Join Date
    Apr 2006
    Location
    Willow/Moose Creek
    Posts
    473

    Default New Tundra 300 carb mount

    Thanks to dirtofAK, I just checked where the airbox is connected to the carb. The hose clamp screw was gone and the "box" was hanging down letting unfiltered air, which had plenty of moisture and belt dust, straight into the carb. This is a new machine with less than 20 hours on it. I found the screw in the pan below the engine, saving me a trip back to Team CC.

    Do you guys think it's worth taking the machine to the dealer to have it documented? I couldn't tell a difference in the way it ran and don't know when the screw came out.

    Crescent Hills, it is worth checking yours. I can post pics if you want.

  2. #2

    Default carb box

    Thanks for the update... we rode ours 30 miles today and as of yest have not found any issues... please post pics and I will follow up on the airbox.

    thanks

    Tom

  3. #3
    Member
    Join Date
    Apr 2006
    Location
    Willow/Moose Creek
    Posts
    473

    Default pics

    The following is the distant view from left side behind the belt:

  4. #4
    Member
    Join Date
    Apr 2006
    Location
    Willow/Moose Creek
    Posts
    473

    Default

    In the previous post look right above the 26 on the belt and here is a close-up:

  5. #5
    Member Dirtofak's Avatar
    Join Date
    Apr 2006
    Location
    Beaver Creek
    Posts
    2,267

    Default

    Here is what it looks like when it is not caught and taken care of:



    There are supposed to be grommets in the holes on the bottom!! These studs on the bottom of the float bowl fit in the grommets.



    Inspect your boot while you can.



    Hope this helps.
    Mike

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •