Results 1 to 3 of 3

Thread: '95 tundra questions

  1. #1
    Member
    Join Date
    May 2007
    Location
    homer
    Posts
    42

    Default '95 tundra questions

    My 95 tundra all in all is in good shape but the some of the track clips have worn through in the corner and the guide portion has broken off. I've found track clips but no one with the crimping tool. Short of buying the tool for 300$ any ideas. I have a small wire feed welder and have thought about zapping on little tabs to replace broken guides. I'm also looking for a couple more tundras between late 80's to late 90's.

  2. #2
    Member Dirtofak's Avatar
    Join Date
    Apr 2006
    Location
    Beaver Creek
    Posts
    2,267

    Default

    You can make a tool by grinding a pair of large vise grips. Just grind them to fit one currently on the track. In a pinch, you can just squeeze them on with channel locks or similar.

    I have a 97 Tundra LT that I will sell. PM if interested.

    In Anchorage.
    Mike

  3. #3
    Member
    Join Date
    May 2007
    Location
    homer
    Posts
    42

    Default clip crimper

    That sounds like a plan. I've got just the old pair of vise grips to use. I sent you a pm about the tundra.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •