Results 1 to 4 of 4

Thread: XCR XPro trigger

  1. #1
    Member
    Join Date
    May 2007
    Location
    missouri
    Posts
    25

    Default XCR XPro trigger

    Have any of you pulled the XPro out and adjusted it?

    I'm in SE Missouri and have a hard time finding a smith to do it.

  2. #2
    Moderator stid2677's Avatar
    Join Date
    Apr 2006
    Location
    Fairbanks Area
    Posts
    7,274

    Default

    I adjusted mine, not all that hard. Mine could only be lowered to about 3.5 lbs and still be safe. I also installed a Timney trigger in my other 700. Not all that hard to do either. Just remember that triggers can cause accidents so be careful if not sure get a gunsmith.

    Steve

  3. #3

    Default trigger

    Got mine to 2.5# and still safe, not that hard to adjust, just make sure it is safe.

  4. #4

    Default

    My understanding is that the only thing you can adjust on the X Mark Pro trigger is the pull weight. The sear and travel screws are concreted in (threads are glued). I recently picked up a Rem 700 in 257 Roy and am gonna adjust mine, its a little heavy.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •