Results 1 to 4 of 4

Thread: Full power 10mm loads

  1. #1
    New member
    Join Date
    Apr 2006
    Posts
    3

    Default Full power 10mm loads

    Good Evening from way into the lower 48. I was reading the 10mm post in the Handguns forum but thought the question might be better asked here.
    I have a S&W 1006 that's been to Novak for sights and reliability package and runs flawlessly, more accurate than I can hold, and I'm looking for advice on full power 180 or 200 grain loads.
    Any help would be greatly appreciated.

  2. #2

    Default

    I would check
    http://10mmtalk.com/
    http://glocktalk.com/forums/forumdisplay.php?f=67
    They both have lots of reloading info and most of it is much more in depth than you will find about anywhere else. One of the posters is Mike Mcnett of Double Tap ammo and he frequently will post pressures and geltain penetration tests.
    akraven

  3. #3
    Member Dan in Alaska's Avatar
    Join Date
    Feb 2007
    Location
    Anchorage
    Posts
    854

    Default

    I like AA #9 powder with full-power 10mm loads. It gives good velocities and burns VERY clean.

  4. #4
    Member
    Join Date
    Apr 2006
    Location
    Anchorage, Alaska
    Posts
    1,461

    Default

    I second Akraven's suggestions...the links that he posted are very informative about the 10mm and Glock 20. I found them useful this past year as I developed loads for my son's 10mm.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •