Hey Guys, I purchased a set of older carbide dies but have a problem. When I set them up in the pro I was having trouble getting the case to go into the sizer die. It had to line up just perfect. I looked at my other set (have one set for 44spec and one for 44mag) the sizer die had a bevel cut in the carbide which allowed for things to be a little off and still be guided into the die for sizing. I contacted RCBS thinking that something was wrong and the explanation was that I had on old set made for single stage presses where things lined up better and that they would not replace it nor was there anyway for me to have a bevel cut or the carbide insert replaced. What are my options. If this thing isn't going to work then I need to get it replaced. Thanks for the help.