loads for .300wsm 168 grain tsx
Looking to load up some for the rifle, but don't have a new book. Probably be using 4350 or 4831 as powder. Any help is appreciated.
don't have your powders listed but here's a link:
Give Ty at Barnes a call and he should be able to help.
I got good results with 65 grains of H4350 and the 168 TSX, 65.5 grains proved to be a bit hot as the bolt was tight. But you know the deal....start lower than 65 grains that was my max safe load in my Kimber and produced about 3080 fps with good accuracy.
I've done a lot of research on this, and a real popular and accurate load seems to be 64.5 - 65.5 gr of H4350 for the 168 TSX in the 300 WSM. BTW, I would go with the 168 TTSX.
Originally Posted by AlaskaCub
Ditto on working up.