Results 1 to 3 of 3

Thread: ITP 26x9x12's a no-go on factory wheels???

  1. #1
    Member wildwill's Avatar
    Join Date
    May 2006
    Location
    Kenai/Soldotna
    Posts
    450

    Default ITP 26x9x12's a no-go on factory wheels???

    Anyone here have helpful input? Looking to put 26x9x12 M/S 589's on the front of my 2008 Sportsman 500. Will they fit with factory wheels and no spacers?

    If they are going to hit the tie rods, is there an advantage to wheels or spacers? If I go with wheels, anyone have an idea of the offset on the SS 106s? Certainly do not want to buy new wheels and spacers--but sounds like I may have a good excuse for new rims.

    Thanks,

    Will
    Since the World is 2/3 Water and Only 1/3 Land, Figures the Good Lord Intended I Fish More Than I Plow.

  2. #2
    Member wildwill's Avatar
    Join Date
    May 2006
    Location
    Kenai/Soldotna
    Posts
    450

    Default ITP Wheels

    Anyone know if the ITP wheels (looking at the 106's) have enough offset to resolve my clearence problem?
    Since the World is 2/3 Water and Only 1/3 Land, Figures the Good Lord Intended I Fish More Than I Plow.

  3. #3
    Member dbull66's Avatar
    Join Date
    Jun 2006
    Location
    Palmer
    Posts
    51

    Default wheels

    They should clear just fine. Your factory wheels are 12x6 on the front. The ITP's are 12x7. Call the tech support at Motosport and ask them.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •