Results 1 to 3 of 3

Thread: 30-06 and GS Custom 160 hv

  1. #1
    Member RMiller's Avatar
    Join Date
    Apr 2006
    Location
    Montana
    Posts
    1,736

    Default 30-06 and GS Custom 160 hv

    30-06 and GS Custom 160 hv.

    I shot some of these through my chrony today.

    There was no load data for this bullet in the 30-06 that I could find so I made my own. This worked great in my rifle.Use load data with with due regard for safe reloading procedures.

    Rifles vary in dimensions of chamber and bore. A safe load in one may not be a safe load in another. Do not substitute loads from one rifle to another without due care.

    ----

    Win Cases, Federal large rifle magnum match primer. 3.355 oal. temp 43*F

    H4350
    59---2858
    60---2911

    61---2942 I will use this one.

    62---2995 This was too much powder and I could not get the bullet to seat right.


    H414
    57---2772
    58---2796
    59---2846
    60---2859
    Attached Thumbnails Attached Thumbnails S5031077.JPG  
    "You have given out too much reputation in the last 24 hours, try again later".

  2. #2
    Member Big Al's Avatar
    Join Date
    Jun 2007
    Location
    Palmer,Alaska
    Posts
    1,737

    Default

    Were these bullets in the 3.00 a pop range?
    "The tree of liberty must be refreshed from time to time with the blood of patriots and tryants." (Thomas Jefferson

  3. #3
    Member RMiller's Avatar
    Join Date
    Apr 2006
    Location
    Montana
    Posts
    1,736

    Default

    $1.44 each. To be sure I wont be plinking with them.

    They are 4 cents more per bullet than the Barnes MRX's that I tried before. I think the MRX's are more than that now.

    I bought them from Bryan Pettit in Palmer. Northern lights trading company.

    http://www.gsgroup.co.za/NLTC.html








    -----
    "You have given out too much reputation in the last 24 hours, try again later".

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •