Results 1 to 5 of 5

Thread: snow plow

  1. #1
    Member
    Join Date
    Aug 2006
    Location
    Elmendorf AFB
    Posts
    78

    Default snow plow

    I'm making my own snow plow for the 4wheeler and was wondering were do the arms from the plow hook up to the bottom of the atv. If anyone has any pictures that would be perfect. I know I'm cheap but if I have the metal its worth a try. I've looked on the computer to try and find pictures of were it hooks to the atv at, but nothing is specific. Thanks for the help.

  2. #2
    Member Crumm's Avatar
    Join Date
    Apr 2006
    Location
    Fairbanks, AK
    Posts
    505

    Default

    Just inside where your feet normally are.

  3. #3
    Member
    Join Date
    Aug 2006
    Location
    Elmendorf AFB
    Posts
    78

    Default

    What does it hook too? The inside of the foot pegs? or somwhere else?

  4. #4
    Member Crumm's Avatar
    Join Date
    Apr 2006
    Location
    Fairbanks, AK
    Posts
    505

    Default

    To a bracket that is u-bolted to the main frame tubes.

  5. #5

    Default Try this.

    http://cyclecountry.com/products/showPage.asp?id=31 This will show you the mount assembly if you select your machine, make, model, and year. Usually the factory engine protection plate is removed and you install an assembly that the plow push arms can be pinned to. Remember to make an access hole in the plate for the oil drain.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •