Page 2 of 2 FirstFirst 12
Results 21 to 23 of 23

Thread: How Long?

  1. #21
    Member
    Join Date
    Jul 2007
    Location
    Between two lakes in Alaska
    Posts
    1,027

    Default

    You guys! After being in and reading the comments, I thought I'd upgrade my brass cleaning. I found a YT video of a guy that went at testing at least somewhat logical. His bottom line was Reptile Bedding (ground walnut shells) was the best media in his study. His time ran from 1 to 2 hours.

    I picked up a 10 qt. bag at Petco for $17.99 and then for the extra shine I went to WallyWorld and got some Nu-Finish car wax for $8.72. The bedding is smaller and not as "sharp" as I remember the Lyman walnut being when new. I'll give it a try next time I get some brass to clean.

    I bought some Starline 500 S&W brass in Black Oxide from MidSouthShooter's on closeout. I wonder how long it'll take to get it to shine?

  2. #22
    Member
    Join Date
    Apr 2006
    Location
    SwampView AK, Overlooking Mt. Mckinley and Points Beyond.
    Posts
    9,088

    Default

    Quote Originally Posted by rbuck351 View Post
    If they don't stick to the chamber, where they gonna go? I believe the pressure required to push the case against the bolt is a lot less than what is required to expand the case to sticking to the chamber. I believe that as the pressure rises the case moves to the bolt before it sticks to the chamber. If it stuck to the chamber before moving to the bolt, straight wall cases would stretch as badly as bottle neck. I have never experienced any issues with wax on cases.
    That is a plausible theory.

    SOTN
    Walk Slow, and Drink a Lotta Water.
    Has it ever occurred to you, that Nothing ever occurs to God? Adrien Rodgers.
    You can't out-give God.

  3. #23
    Member
    Join Date
    Jul 2007
    Location
    Between two lakes in Alaska
    Posts
    1,027

    Default

    Yesterday I dumped my old media from the RCBS brass cleaner. I added slightly less than half a bowl of the ground walnut shells. I added what I thought to be about a capfull of NuFinish. I tore up and added one Bounce anti-static sheet. Ran the machine for about half an hour to mix well.

    I deprimed and added about 50 well used .44 Mag. brass (rounds had been loaded with cast bullets and Unique powder) that had been in storage for several years, about 50 recently shot .45 ACP bass, and about 150 1X range pickup .223/5.56 brass.

    At 2 hours there was still some dirty spots on the .223 brass. I ran for another hour. Brass is not super shine, but looks pretty good and is clean other than the primer pockets will need a brush. All the brass I quickly looked at were clean and no media was packed in the primer pockets.

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •