Results 1 to 12 of 12

Thread: Best 5 HP outboard

  1. #1

    Default Best 5 HP outboard

    I'm running a 4 hp Evinrude 2 stroke on my Clipper Mac Sport 18. It s a great running motor, except it doesn't have reverse.
    I'm going to up grade to a 5 hp next year. I'm looking at the Mercury or the Honda. Does anyone have any experience with either motor? Thanks Todd

  2. #2
    New member
    Join Date
    Apr 2017
    Posts
    3

    Default

    Yes, have used the Honda 5hp as a kicker motor on my jetboat as well as fishing tin boats on small lakes. Great little motor, very good on fuel and pretty reliable. I'm looking at a low hours 2011 model right now as I sold my last one.

    Also might be worth looking at the Yamaha F6 (I know you mentioned 5hp but...) Same engine/weight as the 4 hp range but quite a bit more jam when you need it. I have one pushing my 15' XL Kaboat and it's amazing - torquey, one pull starting, and great on fuel. Nice thing about the new Yamaha portables is you can lay them on 3 sides for transport.

    Haven't used the Merc small engines but they are made by Tohatsu so you wont go wrong there. I think the Honda & Yamaha are the most reliable of the small outboards, though.

  3. #3
    Member skybust's Avatar
    Join Date
    Oct 2006
    Location
    alaska
    Posts
    2,403

    Default

    I have the Merc 5 hourse on my SJX runs great and doesnt burn any fuel nice little engine
    Is it opening day of duck season yet
    Member of Alaska Waterfowl Association

  4. #4
    Member
    Join Date
    Apr 2006
    Location
    Anchorage
    Posts
    1,738

    Default

    they are all good it depends on the deal you get an where you get the work dun if you have some one else doing it this day an age they are all fine
    eng's as I see it cost an weight is what you need to know before you jump in a buy one , SID , PS, as an old timer on the river running
    what type of shear pin in the prop , as I don't like shear pins , I want the slip clutch in the prop, it is a safety thing , it will break just when you will need it the most if you run rivers at all, going on pounds , lakes , or large rivers, don't count ,

  5. #5
    New member
    Join Date
    Apr 2017
    Posts
    3

    Default

    Honda 5hp uses a shear pin. Yamaha and Tohatsu are a slip prop. Not sure if the Merc uses the same prop as Tohatsu.

  6. #6
    Moderator bkmail's Avatar
    Join Date
    Apr 2006
    Location
    Palmer, AK.
    Posts
    3,963

    Default

    Tohatsu makes great motors. No issues with ours and was less than a Honda or Yamaha.

    Bk
    BK Marine Services 232-6399
    Planar diesel heaters dealer, service, warranty, and installation.
    Airboats, ocean boats, and river boats serviced.
    https://www.facebook.com/BKMarineServices?fref=ts

  7. #7
    Member
    Join Date
    Dec 2013
    Location
    Alaska
    Posts
    1,305

    Default

    Quote Originally Posted by brombones View Post
    Yes, have used the Honda 5hp as a kicker motor on my jetboat as well as fishing tin boats on small lakes. Great little motor, very good on fuel and pretty reliable. I'm looking at a low hours 2011 model right now as I sold my last one.

    Also might be worth looking at the Yamaha F6 (I know you mentioned 5hp but...) Same engine/weight as the 4 hp range but quite a bit more jam when you need it. I have one pushing my 15' XL Kaboat and it's amazing - torquey, one pull starting, and great on fuel. Nice thing about the new Yamaha portables is you can lay them on 3 sides for transport.

    Haven't used the Merc small engines but they are made by Tohatsu so you wont go wrong there. I think the Honda & Yamaha are the most reliable of the small outboards, though.
    What kind of speeds are you getting with that Yamaha on the kaboat?

  8. #8
    New member
    Join Date
    Apr 2017
    Posts
    3

    Default

    Quote Originally Posted by Yukon Cornelius View Post
    What kind of speeds are you getting with that Yamaha on the kaboat?
    12-13 mph with myself, dog, fuel, and day gear, with the factory 7 pitch prop. Have got it going faster with higher pitch props but 7 is the sweet spot where it gets decent speed and can still push a 600lb load upriver without struggling.

    I put a fin on the motor and probably lost 1mph but the boat runs nice and flat, and planes out instantly.

  9. #9
    Member
    Join Date
    Apr 2006
    Location
    Anchorage
    Posts
    1,738

    Default

    One more thing on the eng. you need a REV. on it, come around a bend fast in a small stream an a log is there you need all the help in the world
    to stop the rig you have , rivers , ponds , lakes, don't count, it is the small streams that will do you in, as I see it SID

  10. #10
    Member
    Join Date
    Dec 2013
    Location
    Alaska
    Posts
    1,305

    Default

    Quote Originally Posted by brombones View Post
    12-13 mph with myself, dog, fuel, and day gear, with the factory 7 pitch prop. Have got it going faster with higher pitch props but 7 is the sweet spot where it gets decent speed and can still push a 600lb load upriver without struggling.

    I put a fin on the motor and probably lost 1mph but the boat runs nice and flat, and planes out instantly.
    That's pretty decent.

  11. #11

    Default

    Thanks for all the posts.

  12. #12
    Member
    Join Date
    Feb 2012
    Location
    new hampshire
    Posts
    234

    Default

    I was going to buy a Honda motor....but the place to get it serviced (if anything happened ) was too far away. So get the motor brand that is close enough to you...for service...Love my Yamaha 4 stroke.....and get a 4 stroke..no mixing,no smoke, no noise.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •