Results 1 to 5 of 5

Thread: Ruger M77 firing pin spring tool needed

  1. #1
    Member
    Join Date
    Nov 2010
    Location
    The Valley
    Posts
    238

    Default Ruger M77 firing pin spring tool needed

    I have a new spring for my M77 Mark II. Does anyone have the compression tool to change out the spring. I'm okay with a smith doing it too if there is one out there. I imagine this is a 5 minute exercise with the right tool.
    Thanks.

  2. #2
    Member gunbugs's Avatar
    Join Date
    Jul 2007
    Location
    Fairbanks
    Posts
    1,382

    Default

    I have what you need, but I'm in Fairbanks.
    "A strong body makes the mind strong. As to the species of exercises, I advise the gun. While this gives moderate exercise to the body, it gives boldness, enterprise, and independence to the mind."

  3. #3
    Member
    Join Date
    Nov 2010
    Location
    The Valley
    Posts
    238

    Default

    Thanks for the offer but being in wasilla makes that a challenge.

  4. #4
    Member 1Cor15:19's Avatar
    Join Date
    May 2009
    Location
    Dillingham, AK
    Posts
    2,482

    Default

    Quote Originally Posted by peaceman View Post
    Thanks for the offer but being in wasilla makes that a challenge.
    USPS will probably have it back and forth as fast as you'll find someone else. He doesn't even need the complete bolt, so shipping should be as cheap as driving around the valley.
    Foolishness is a moral category, not an intellectual one.

  5. #5
    Member
    Join Date
    Nov 2010
    Location
    The Valley
    Posts
    238

    Default

    Quote Originally Posted by gunbugs View Post
    I have what you need, but I'm in Fairbanks.
    So let me clarify, are you willing to change out the spring or would you be willing to send me the tool? Obviously I would pay shipping both ways.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •