Results 1 to 10 of 10

Thread: Looking for someone to do fiberglass

  1. #1
    Member ACNDHO's Avatar
    Join Date
    Dec 2006
    Location
    wasilla
    Posts
    408

    Default Looking for someone to do fiberglass

    I have a fiberglass deck that needs replaced. Who in the Valley or elsewhere does good glass work. Last outfit I brought it to took 3 months to give me a new motor quote, but all I need is a new deck.
    Even a jackass won't stumble on the same stone twice.

  2. #2
    Sponsor potbuilder's Avatar
    Join Date
    Apr 2006
    Location
    Palmer
    Posts
    4,229

    Default

    what kind of boat and aprox size ?

    Alaska Shrimp Pots

    Rigid & Folding Shrimp & Crab Pots
    Electra Dyne Pot Haulers
    Ropes, Buoys, Bait
    alaskashrimppots.com
    akshrimppots@mtaonline.net
    907 775 1692

  3. #3
    Moderator bkmail's Avatar
    Join Date
    Apr 2006
    Location
    Palmer, AK.
    Posts
    4,116

    Default

    CAC PLASTICS, behind Evangelo's. Ask for Steve, great guy.
    Bk

  4. #4
    Member ACNDHO's Avatar
    Join Date
    Dec 2006
    Location
    wasilla
    Posts
    408

    Default

    19' Markell with cuddy cabin. Sorry, CAC had the new motor quote.
    Even a jackass won't stumble on the same stone twice.

  5. #5
    Sponsor potbuilder's Avatar
    Join Date
    Apr 2006
    Location
    Palmer
    Posts
    4,229

    Default

    are you wanting are plywood or foam cored deck ?

    Alaska Shrimp Pots

    Rigid & Folding Shrimp & Crab Pots
    Electra Dyne Pot Haulers
    Ropes, Buoys, Bait
    alaskashrimppots.com
    akshrimppots@mtaonline.net
    907 775 1692

  6. #6
    Member logman 49's Avatar
    Join Date
    Dec 2007
    Location
    Just South of Moose Pass
    Posts
    353

    Default

    Rainbow Fiberglass in Seward 821-8015

  7. #7
    Member Akgramps's Avatar
    Join Date
    Apr 2008
    Location
    Last civilized place on the planet
    Posts
    2,078

    Default

    Neat boat, The Markel used Glasply hulls, at least in some of them. The Glasply that I have (1982) has a cored front deck, balsa and looks to be ~ 3/4" thick.
    Is the entire deck bad? or just a section? The whole deck would be a bit of a project, just guessing but ideally done from below, which will be a messy proposition and difficult IMO. I am sure there are easy ways to do it for people that make those type of repairs often. I would imagine it could be done from above as well, far simpler to do but then you have to match gel-coat and or paint the boat..

    Any pictures...?
    “Nothing worth doing is easy”
    TR

  8. #8
    Member JR2's Avatar
    Join Date
    May 2009
    Location
    Eagle River
    Posts
    2,129

    Default

    Plaschem in Anchorage or CAC in the valley. Or Potbuilder if he will do it.
    2007 Kingfisher 2825 - Stor Fisk

    Civilization ends at the waterline. Beyond that, we all enter the food chain, and not always right at the top. -- Hunter S. Thompson

  9. #9
    Sponsor potbuilder's Avatar
    Join Date
    Apr 2006
    Location
    Palmer
    Posts
    4,229

    Default

    aprox how big, how many hatches ??? let me know.

    Alaska Shrimp Pots

    Rigid & Folding Shrimp & Crab Pots
    Electra Dyne Pot Haulers
    Ropes, Buoys, Bait
    alaskashrimppots.com
    akshrimppots@mtaonline.net
    907 775 1692

  10. #10

    Default

    907-315-4114 vang composites hes really good names Ryan leave a message on his phone he doesnt always have it on

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •