Results 1 to 20 of 20

Thread: lead head jigs

  1. #1
    Member
    Join Date
    Jun 2010
    Location
    juno
    Posts
    113

    Default lead head jigs

    wondering if anybody has any tricks when pouring your own lead head jigs in 16&24oz how to get it to fill the cavity all the way so you get a good spike so the grubtail cant slip right off. i can get the heads to come out fine just wondering if you can really preheat the j hook to the point where it might get brittle......

    thanks!!!

  2. #2
    Member
    Join Date
    Feb 2011
    Posts
    1,960

    Default

    I cut the lead barb off so the tail will not split. To get the barb to fill when pouring make sure the mold is hot first. Best of luck

  3. #3

    Default

    Have you tried a drop of super glue to hold the grub on? I am not in as cold a place as you are but it works well here.

  4. #4
    Premium Member kasilofchrisn's Avatar
    Join Date
    Jan 2009
    Location
    Central Kenai Peninsula
    Posts
    4,889

    Default

    Use some Drop Out spray from frankfort Arsenal. It is a miracle product for mold issues.
    http://www.midwayusa.com/product/763...e-6-oz-aerosol
    Also pre-warm your hooks. Not super hot but just hot enough you can still put them in with your bare hands at the hottest.
    Too bad your in Juneau. If you lived closer to Slodotna I would help you figure this out in my jig making workshop.
    "The closer I get to nature the farther I am from idiots"

    "Fishing and Hunting are only an addiction if you're trying to quit"

  5. #5
    Member
    Join Date
    Oct 2009
    Location
    Great Falls Montana and Coffman Cove Alaska
    Posts
    27

    Default

    I have found besides making sure the mold is hot, to tip the mold when I begin pouring so the part where the barb is located fills first.

  6. #6
    Member
    Join Date
    Jun 2010
    Location
    juno
    Posts
    113

    Default

    toyed around with it last night, wasn't getting it hot enough, ended up making 42 last night, ready for summer!!! anybody know where to find boneyard grubs?

  7. #7
    Member
    Join Date
    Apr 2006
    Location
    Anchorage
    Posts
    1,763

    Default

    one thing more the lead has a temp that is quite a wide range after it is melted the higher the better, in making weights,
    this goes along with the temp of the mold , great going enjoy your fishing SID

  8. #8
    Member
    Join Date
    Jan 2007
    Location
    Juneau
    Posts
    2,127

    Default

    Definitely temperature.......I use a used hook set up and pour one or two to get the mold hot, then once I'm pouring I keep pouring with all the hooks and eyes set up and ready to go and crank em out, gets better the more and faster you pour, But I had the same problem first few times. YOu can also use a butane torch to heat both plates immediatley before your first pour.

    So 16 and 24 oz lead heads in Juneau?........I use 8's and some 12's if current is an issue, down to 350-400 feet? You are strong my friend However, if you want to trade some of your 16's for a pair of 8's I'd be amenable as I've got lots and lots of 8's (with the large hook though, modified the mold), and I like to have a few of the big ones on board.

    I wouldn't sweat the boneyards....expensive. Between western auto and Freddies or Harri's there is usually someone selling decent tails (storm, Kahlins, berkeley) for less or at 2 bucks a tail. Largely I've gotten tired of donating plastic and I use the big squid tubes from Western Auto. They last a loooong time adn I don't see any catch difference. Rockfish and arrow tooth don't do nearly the damage to the squids.

  9. #9

    Default

    Quote Originally Posted by vermilion View Post
    toyed around with it last night, wasn't getting it hot enough, ended up making 42 last night, ready for summer!!! anybody know where to find boneyard grubs?
    http://www.outkastfishingtackle.com/category_s/439.htm


    Heavy Hitter Fishing
    https://www.facebook.com/pages/Heavy...54441957966186

    Kodiak Custom Fishing Tackle Pro-Staff


  10. #10
    Member
    Join Date
    Jun 2010
    Location
    juno
    Posts
    113

    Default

    i run one of the charter boats around town i use lighter..... heavier weights fish straight up and down wayyyyyy better

  11. #11
    Member
    Join Date
    Jan 2007
    Location
    Juneau
    Posts
    2,127

    Default

    I'd imagine on a charter you are right, but I largely backtroll and jig\drift.......I go as light in lead and rod as I can. Trevala's and Avet's

    I'm still up for a trade if you ever need 8's. 2 for one......heck, I'd probably even go three for one as I've got enough 8's for a charter boat myself!

  12. #12

    Default

    Quote Originally Posted by vermilion View Post
    ...lead head jigs in 16&24oz how to get it to fill the cavity all the way so you get a good spike so the grubtail cant slip right off....
    The key in addition to a hot mold and hot lead is a fast pour. You want one that holds 2# of lead at a minimum and 3# or 4# is better. Pour that mold full and do it fast.

  13. #13
    Member homerdave's Avatar
    Join Date
    Apr 2006
    Location
    homer, alaska
    Posts
    3,922

    Default

    Quote Originally Posted by vermilion View Post
    anybody know where to find boneyard grubs?
    i just recently heard that boneyard was no more, but that they were bought by someone who is hoping to resurrect them.... Some Homer charter guys may know more.
    Alaska Board of Game 2015 tour... "Kicking the can down the road"
    http://www.alaskabackcountryhunters.org/

  14. #14

    Default

    Quote Originally Posted by homerdave View Post
    i just recently heard that boneyard was no more, but that they were bought by someone who is hoping to resurrect them.... Some Homer charter guys may know more.
    Got similar intel as well. Their site is up but have never purchased anything online from them.


    Heavy Hitter Fishing
    https://www.facebook.com/pages/Heavy...54441957966186

    Kodiak Custom Fishing Tackle Pro-Staff


  15. #15
    Moderator Paul H's Avatar
    Join Date
    Apr 2006
    Location
    Anchorage
    Posts
    5,594

    Default

    Quote Originally Posted by MGH55 View Post
    I cut the lead barb off so the tail will not split. To get the barb to fill when pouring make sure the mold is hot first. Best of luck
    Concise and to the point, the barbs just cause the tails to split, and the key to getting any mold to properly fill out is to make sure the mold is pre-heated. A quick way to pre-heat a lead head mold is to cast up several lead heads w/o hooks, and once they start filling out, add the hooks and eyes and crank them out.

    One trick for keeping the soft bodies from getting torn up when threading the hook through is to heat up a 1/4" dia rod or screwdriver with a torch and melt a hole into the body of the grub or shad.
    Those that are successful in Alaska are those who are flexible, and allow the reality of life in Alaska to shape their dreams, vs. trying to force their dreams on the reality of Alaska.

    If you have a tenuous grasp of reality, Alaska is not for you.

  16. #16
    Premium Member kasilofchrisn's Avatar
    Join Date
    Jan 2009
    Location
    Central Kenai Peninsula
    Posts
    4,889

    Default

    Quote Originally Posted by AK2AZ View Post
    Got similar intel as well. Their site is up but have never purchased anything online from them.
    I found a good deal on Boneyard grubs this last summer from Boneyard on EBAY.
    Bought a lot of 100 white grubtails for a decent price.
    Well they never shipped them. So after I emailed them they promised to deliver and give me some extra for the trouble.
    Long story short EBAY refunded my money.
    I honestly don't think they ever sent my stuff.
    New ownership might be good but the old owners certainly didn't have their act together.
    If a guy could get ahold of those molds I know the people who can make them with their commercial equipment.
    But the molds are not cheap and you usually have to run a full day of each color. I know a guy who will do 1/2 day runs per color but it still isn't cheap i'm sure.
    I think from now on I'll start trying Kalins grubs. Especially the way Boneyard treated me on that last deal.
    btw Didn't they used to be a forum member here?
    "The closer I get to nature the farther I am from idiots"

    "Fishing and Hunting are only an addiction if you're trying to quit"

  17. #17
    Member
    Join Date
    Jan 2007
    Location
    Juneau
    Posts
    2,127

    Default

    Chris,

    what constitutes a decent price.......if I can ever get a full size grub for less than two bucks I am okay with that, nearer to a buck and I become a hoarder.......what kind of price are you talkin?

  18. #18
    Member
    Join Date
    Apr 2008
    Posts
    2,448

    Default

    Kalins makes a great grub. I have had just as good of results and they are just as tough.

  19. #19
    Member
    Join Date
    Jan 2007
    Location
    Juneau
    Posts
    2,127

    Default

    Best I've found yet is Storms thunder grub (super tough)......discontinued now but I got my hands on some new old stock recently and am hoarding like a neckbeard with 22 lr could only dream.

  20. #20
    Premium Member kasilofchrisn's Avatar
    Join Date
    Jan 2009
    Location
    Central Kenai Peninsula
    Posts
    4,889

    Default

    Quote Originally Posted by Catch It View Post
    Chris,

    what constitutes a decent price.......if I can ever get a full size grub for less than two bucks I am okay with that, nearer to a buck and I become a hoarder.......what kind of price are you talkin?
    I think with shipping my price was going to be in the neighborhood of $1.89 each or so for the 12" big bone grub.
    But like I said I never did receive them from Boneyard.
    I think they retail for $3.50 each or so if you can find them.
    "The closer I get to nature the farther I am from idiots"

    "Fishing and Hunting are only an addiction if you're trying to quit"

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •