Results 1 to 5 of 5

Thread: Hydrolite Boats?

  1. #1
    Member
    Join Date
    May 2006
    Location
    Fairbanks
    Posts
    195

    Default Hydrolite Boats?

    Does anyone have an opinion on hydrolite boats? I have a 90 hp yamaha two stroke with a prop that I will eventually put a jet on. I am looking at 18' boats, preferable with a tunnel and the ability to eventually put UHMW on the hull. What are youre suggestions?
    "When everything seems to be going against you, remember that the airplane takes off against the wind, not with it."
    Henry Ford

  2. #2
    Member
    Join Date
    May 2006
    Location
    Fairbanks
    Posts
    195

    Default

    How about King Salmon marine in Palmer
    www.kingsalmonmarine.net
    "When everything seems to be going against you, remember that the airplane takes off against the wind, not with it."
    Henry Ford

  3. #3
    Member
    Join Date
    Jul 2006
    Location
    Soldotna, AK
    Posts
    108

    Default Atec Hydrolite

    I'm very happy with the one I have. It's a 16x60 Tunnel with 24" sides. 3 other guys that I know are happy with their boats also. Don't know of anyone that is dissatisfied. You are welcome to stop by and check it out if you get down this way.

  4. #4
    Member
    Join Date
    May 2006
    Location
    Fairbanks
    Posts
    195

    Default

    What are the lengths of the other boats you know about?

    What motor do you have on yours?

    I would like to see what you have if you don't mind. Are you in Anchorage?

    Thanks

    Sean
    "When everything seems to be going against you, remember that the airplane takes off against the wind, not with it."
    Henry Ford

  5. #5
    Member
    Join Date
    Jul 2006
    Location
    Soldotna, AK
    Posts
    108

    Default

    One of the other boats is a 16, the other 2 are 18s. I have a 30 HP Mercury 4 Stroke on my boat, good for about 28 mph. All of these boats are in Soldotna but you'll be down here anyway if you are going to order one.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •