Results 1 to 12 of 12

Thread: 30" Sedona Inlaws on Teryx

  1. #1
    Member Grayling Slayer's Avatar
    Join Date
    Jul 2007
    Location
    Fairbanks, AK
    Posts
    728

    Default 30" Sedona Inlaws on Teryx

    Upgraded my wheels and tires this weekend and bolted on a 2" lift.


    "I'd rather be fishing!"

  2. #2
    Member tjm's Avatar
    Join Date
    Jan 2007
    Posts
    2,125

    Default

    Are those the same as the "Mudder Inlaws"....noticed on Craigs List guy is carrying them now, looks a lot like the Terminators...

    ...either way, looks good...

    You running stock clutching?
    ------------------------------------------------
    pull my finger....

  3. #3
    Member Grayling Slayer's Avatar
    Join Date
    Jul 2007
    Location
    Fairbanks, AK
    Posts
    728

    Default

    Yes that is the same tire. I have stock clutching now, but not for long. Going to try the EPI clutch kit soon before I start destroying belts.
    "I'd rather be fishing!"

  4. #4
    Member
    Join Date
    Apr 2006
    Location
    Mat-Su
    Posts
    1,179

    Default

    OP, have you noticed any difference in handling with the 2" lift kit? I have looked at putting a lift kit on our Prowler, but am concerned about it getting 'tippy'.

  5. #5
    Member Grayling Slayer's Avatar
    Join Date
    Jul 2007
    Location
    Fairbanks, AK
    Posts
    728

    Default

    It actually feels more stable. The relocation of the shocks makes it stiffer, plus the tires are wider.
    "I'd rather be fishing!"

  6. #6
    Member fullkurl's Avatar
    Join Date
    Apr 2006
    Location
    Alaska/Idaho
    Posts
    2,162

    Default

    Quote Originally Posted by Grayling Slayer View Post
    Yes that is the same tire. I have stock clutching now, but not for long. Going to try the EPI clutch kit soon before I start destroying <tundra>
    fixed it...
    I bought a similar set and could barely turn the handle bars.
    And those treads deal carnage to tundra in epic proportions...

    I love to ride but those things are brutal...
    Proud to be an American!

  7. #7

    Default

    Speaking from experience, go ahead and order both front axles now. Find a quality set, Highlifter, Gorilla, or Rhino, not sure if you can get Teryx axles from Rhino though. My machine is set up to run 30"'s and I still bust axles. Now I am worried about the front diff, it's making a strange noise when spinning both fronts in the goo.

  8. #8
    Member tjm's Avatar
    Join Date
    Jan 2007
    Posts
    2,125

    Default

    Quote Originally Posted by Fishkill View Post
    Speaking from experience, go ahead and order both front axles now. Find a quality set, Highlifter, Gorilla, or Rhino, not sure if you can get Teryx axles from Rhino though. My machine is set up to run 30"'s and I still bust axles. Now I am worried about the front diff, it's making a strange noise when spinning both fronts in the goo.
    What is the angle of your axles?....
    ------------------------------------------------
    pull my finger....

  9. #9

    Default

    Couldn't tell you the exact angle, but it is a XMR which comes with stronger axles than other Outlanders. Still eats axles if I am not careful with the throttle, of course with the few mods I have, it is putting out around 80 horses too.

  10. #10
    Member nastyak650h1's Avatar
    Join Date
    Jan 2014
    Location
    Anchorage
    Posts
    32

    Default

    2010-11 xmrs had problems with the gorilla axles and they updated the axles since.. My buddy destroyed a axle in his xmr this past weekend


    Sent from my iPhone using Tapatalk

  11. #11
    Member
    Join Date
    Dec 2011
    Location
    wasilla
    Posts
    452

    Default

    Holy crap those are huge tires!!! If you take it easy you might not burn through axles... to bad. I have a 2" lift on my rhino and 27" tires. My axle angle is maxed out.

  12. #12
    Member
    Join Date
    Jul 2011
    Location
    Anchorage
    Posts
    1,121

    Default

    The picture of the tire comparison is pretty impressive! I hope it goes the places that it appears it can...very nice set up.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •