Results 1 to 10 of 10

Thread: Dalls Sheep horn removal

  1. #1
    Member markopolo50's Avatar
    Join Date
    Jan 2008
    Location
    Fenton,Michigan
    Posts
    838

    Default Dalls Sheep horn removal

    I am curious how you guys remove the horns off Dall sheep so they can be cleaned inside the horn? I had one mounted a couple years ago and wasn't happy and had to return it to get it "fixed". I suspect it wasn't handled correctly. It is pretty good now and it is as close as they can get it. Just wonder how many techniques there are.

    Thanks

  2. #2
    Member dieNqvrs's Avatar
    Join Date
    Feb 2008
    Location
    Kodiak
    Posts
    486

    Default

    2 ways I know of, rot and cook.

    Rot: wrap in plastic and place somewhere warm 80+ degrees for 4+ days cut along horn edge and bang with a mallet to aid in loosing. Stinks bad

    Cook: use a bucket heater or some other heat the source to heat wayer hot. Submerge one horn at a time and cook the membrane that hold the horn on. Cut membrane and use mallet to assist in banging them off Do one at a time.

  3. #3
    Member cod's Avatar
    Join Date
    Mar 2008
    Location
    Kenai Peninsula, Ak.
    Posts
    2,213

    Default

    I think Kenny at Skull and Bones lets his beetles do the work. He wraps them in plastic and leaves the beetles after em for a bit. I think I saw some in his beetle box a couple weeks ago and asked about them. Give him a call.
    Your sarcasm is way, waaaayyyyyyyy more sarcastic than mine!

  4. #4
    Member markopolo50's Avatar
    Join Date
    Jan 2008
    Location
    Fenton,Michigan
    Posts
    838

    Default

    Thanks guys, I am trying to post pics of before, during and after but it is late and brain not working right. Pics tomorrow

    Thanks

  5. #5
    Sponsor protaxidermy's Avatar
    Join Date
    Jan 2011
    Location
    Fairbanks
    Posts
    731

    Default

    Anouther way is to let the horns dry for a week on the skull plate , Hold them up high over your head & SLAM them down on a large block of wood.

    THEY WILL COME OFF. you might have to do it a couple times.

    Then Boil the skull plate & that will remove the smell.

    Pour Boiling water in the horn caps with DAWN soap.

    Wash the inside of the caps out , dump the water out dry a little , then pour some BORAX powder in & roll it around.

    Let the horn dry over night rub out the loose powder . Now they are ready to BONDO the caps back on.

    This method you wont stain the horns by the rotting fluids that a plastic bag can create.

    RJ Simington
    PRO Taxidermy www.protaxidermy
    907 322 0936
    Custom Taxidermy, Experience the difference !!

  6. #6
    Member markopolo50's Avatar
    Join Date
    Jan 2008
    Location
    Fenton,Michigan
    Posts
    838

    Default

    Protaxidermy, that sounds like the best way, instead of boiling the whole horn. Also because mine is double broomed, the ends split and were pretty ragged.

    I have to show these pics it two posts. Here is the before, as in my avatar, and the first attempt.

    141.jpg

    sheepatparkeys2.jpg

  7. #7
    Member markopolo50's Avatar
    Join Date
    Jan 2008
    Location
    Fenton,Michigan
    Posts
    838

    Default

    And the second try, and the final attempt. I know what to ask if I ever get a chance to take another sheep, thanks again for the info.

    sheepathome1.jpg

    dallredone.jpg

  8. #8
    Member FullCryHounds's Avatar
    Join Date
    Oct 2011
    Location
    Colorado
    Posts
    129

    Default

    I use beetles to remove them. I put a plastic bag over each horn and wrap the base. It takes about two hours for the beetles to eat enough meat/tissue and the horns come right off. Guarantees no residual odor or staining.

  9. #9
    Member 4merguide's Avatar
    Join Date
    Feb 2012
    Location
    Kenai Peninsula, Alaska
    Posts
    9,749

    Default

    All I ever did was work the tip of a real thin knife in all around the bases, then bonk them off as said. Come off pretty easily.....
    Sheep hunting...... the pain goes away, but the stupidity remains...!!!

  10. #10
    Member Hughiam's Avatar
    Join Date
    Nov 2012
    Location
    Palmer, AK
    Posts
    380

    Default

    Ive pulled somewhere in the neighborhood of 200 sets in about 3 years. We did everything from game garm goats to Bongo. What I found worked best on "fresh" horns was to wrap the bases in wet paper towels(really wet!) and put them in a plastic garbage bag and let them sweat. They usually pop within a few days. On dried horns, I throw them in a rubber made container of water for a week-2 weeks. Then pull them out and pull and see if they go. If not, back in the water and repeat. I have had to "pop" them like RJ suggests. But be very careful, if not hit correctly, you can break off a tip and if the skull plate is cut too short break, the skull cap. As far as cleaning, then I use something similar to a toilet brush and mild soap like Dawn inside the horn cores. For the skull plate, you should boil that in a Tide Liquid with Bleach and Dawn. I guestimate around 1/4 cup of each. This takes the grease out and gets rid of all the grisel and tissue. Then boil again in clean water. Bondo the cores on the skull cap and you are done.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •