Results 1 to 2 of 2

Thread: Norma URP for 3006

  1. #1
    Member Hunt&FishAK's Avatar
    Join Date
    Feb 2009
    Location
    Valley trash
    Posts
    2,316

    Red face Norma URP for 3006

    Anyone use this powder in a 3006? I would like to brew up a load using brand new nosler brass, nosler 165 or 180 ABs with winchester primer. Would love some advice regarding that powder.



    Release Lake Trout

  2. #2
    Member OKElkHunter's Avatar
    Join Date
    Jan 2007
    Location
    Alaska
    Posts
    449

    Default

    Looks like its has a similar burn rate to H4350. I'd start at that minimum recommended load and work up slowly. It is also in the WIN 760 and RE17 range.
    Here's some data I found online for norma powder for 30/06: http://www.norma.cc/en/Ammunition-Ac...6-Springfield/
    Always start at the minimum and work up. If no minimum is listed, reduce max load by 5% and work up in small increments.
    I have used Hornady bullet minimum loads with Nosler ABs and worked up with no issues.
    “Don't expect to build up the weak by pulling down the strong." ~Calvin Coolidge~

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •