Page 2 of 4 FirstFirst 1234 LastLast
Results 21 to 40 of 74

Thread: 585 HE -- Cases In Production --

  1. #21
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Another application for our 585 HE is for guys with the 14.5mm
    PTRDs, to use our case with chamber insert. In many places 14.5
    cases are scarce, real expensive, as well as most 14.5mm cases
    being steel are not the easiest to resize/reload. Our case sizes
    like regular cases and can be easily reloaded many times.
    And in a PTRD with almost a 5 foot long barrel can get 650gr
    spitzer bullet to the same speed the 14.5mm gets a 900 gr using
    3 times as much powder. 3300 fps. Or get a 900gr at 2800.
    Great possibilities for fun shooting. And tactical use in a place
    where it would be useful to reload in the operations field, where
    steel cases are scarce. A 100 cases do over 2000 reloads.

    I like Enfields to put our 585HEs in, for reasonable cost guns. .
    Here is inexpensive way to fancy up the Enfield Bolt handle by
    cutting the dogleg part of the old handle off and welding on
    inexpensive contoured handles I found, one of which is like
    Ruger 77 handle, one on the right . Something even a novice
    like me can do.....

    A lot of guys are crazy about CEB bullets. Here are light 450gr
    ones in our 24ga FH. The hollowpoint can range in weight 450gr
    to 700gr.. The 24ga FH is nice complement to our
    585HE for the shotgun only deer hunters... Ed

     

  2. #22
    Member
    Join Date
    Jan 2007
    Location
    Southwest Alaska
    Posts
    2,226

    Default

    I believe a P-14 Winchester action with the ears and sights still on would make up a very nice heavy rifle like these. The sights are very good on the old actions, and with the ears they are bomb-proof.

    In an A-Sq. Coil-Chek stock, 25" barrel running around 15 pounds total would be perfect.
    Great spirits have always found violent opposition from mediocre minds. The latter cannot understand it when a man does not thoughtlessly submit to hereditary prejudices but honestly and courageously uses his intelligence. Albert Einstein

    Better living through chemistry (I'm a chemist)

    You can piddle with the puppies, or run with the wolves...

  3. #23
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    The profiled barrels they have are 26". Are heavy profile and

    can be shortened ......I like Coil Chek stocks too.

    We have to open the port for our longer case so the ears have to be off

    and I just put a simple peep sight on the back bridge, and some weight

    in the butt and we got a 14 lb blaster.Ed

  4. #24
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    I looked at Enfield here with ears on and it would be possible to open
    port and leave the back part of the ears that holds original sight. It is
    something I never did, we just by tradition rounded the whole bridge off.
    But we can learn different ways to do things.

    For lightweight plinking, deer hunting, etc, in 585HE as well as 24ga FH
    here is picture of 58cal Hornady sabot that holds .451/.452" light
    bullets 225 to 300 gr. A way to shoot targets economically. Low recoil
    but a big bang and satisfaction. That sabot is one made for ML, but
    with .452" bullet in it is a real tight fit in brass cases, to stay
    in place and give good ignition. A 250 gr bullet would go about
    mach 4 with a top load..

    Here is what 585 bull barrel, target blank looks like, 1 5/8" OD and 32" long.
    It'll go in heavy action of some kind. 4th one from the left. The one in yellow
    sleave on top, is a heavy contoured one with muzzle of .980" ..The 5th, 6th,
    7th blanks on bottom are straight 1.375" 585 regular twist blanks.
    One in paper wrapper is slow twist 585 barrel...Ed


  5. #25
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Here is picture, nice cast bullet I like for the 585HE and 24ga FH.
    It is .585" diameter and 650 gr and these particular ones are a
    hard lead alloy, plus they've been heatreated. They are about as
    hard as copper jacketed softs. These have a flat base, and
    fairly streamlined..

    But to penetrate good and do great damage to game or target they
    can be soft lead and hollowbase like Minie Bullets. Here is picture
    of timber drilled through with .585 soft lead Minie from 585HE.
    Picture is the back of 6x6 timbers where Minie bullets came out. Ed


  6. #26
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    In Canada there are 3 guys there now setting up 585HEs,
    and one setting up 24ga FH. Another friend setting up a 585HE
    handed out a bunch of cases and info sheets at the SCI convention.
    We are getting some more reamers made. Some more dies sent
    here. Another pallet load of cases coming.
    Here is picture of a light spitzer bullet in the 24ga FH case,
    will work in 585 also. Good for hunting and medium range
    target work.

    Here is picture of 585HE we did in the FBW with regular two
    piece stock.We put a tenon on the forearm to wedge into the
    front of the action below the barrel and a tight barrel band
    on the front. Ed


  7. #27
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Here is comparison of our 585HE and Trex case, and while
    we have barrels of cases and more coming and many available
    in stock in AUS, many guys with Trex guns can't get cases.

    Here is picture of a neat falling block that could work for our
    585HE with little work, the Wickcliff.
     

    Here is picture of the singlestack mag box we built for Enfields
    fitted to the bottom of BBK action.Very little changing and
    it fits a lot of different actions, as a fixed magazine, with its
    own feed lips,and we load from the top.Ed


  8. #28
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Here is picture of a 585HE we did in a Mauser 98 as a
    singleshot test gun. We used a composite stock we
    adapted to fit action. Weighted to 12 lbs.

    And speaking of singleshots a fellow in the Yukon is
    just finishing up one in a Ruger #1.
    Here is one reason to like 585 calibers is bullet varieties,
    this picture is only about half the bullets and slugs
    we know of, and most can easily found. Ed


  9. #29
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    There is couple 585 videos on Swann Gunsmithing's Facebook site;
    Of our 585HE in first Ruger #1, that was done in Australia, set up
    for the poster Tankhunter on the AR big bore forums. That gun killed
    the first buffalo that I posted picture of above. You can go
    direct to the page and click on the videos to watch the test firings..
    https://www.facebook.com/swanbarrels/videos
     
    Here is picture our 585HE in a Montana PH action in a MPI stock, with the
    style of a CZ stock, that a guy is setting up. The stock will be finished brown
    and metal finished with a Gun Kote finish...Ed


  10. #30
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    One of the first of modern 585 caliber wildcats, since WW2, the 575 Miller Greiss Magnum,
    was first in records in the fifties, It was made from BMG brass shortened to 2.70" long
    and necked up from 50 cal to .585" with a little sharper shoulder..
    They rebated the rim quite a ways to fit 98 Mauser bolt.Used a special action.
    Listed as a shooting 750gr bullet about 2400 fps. It holds about 150gr of ball powder under
    a 750 gr bullet, maybe little less than 3" 50cal spotter case, where our 585HE holds
    180gr under a 750gr'.
    We made one for experimenting on a full length BMG case.With rim left same as the base
    and would need a BMG sized bolt and action. I'm glad to be a big bore wildcatter,
    and happy to be in the company of big bore nuts, old and new. Years ago when
    guys did big wildcats they took what was available, to rework, and maybe
    they could have used the 3" spotter case if they could have found a barrel full.
    But it takes a lot of work to reform cases that much, with the multiple dies,
    multiple annealings and case trimming and extreme reworking of actions,
    which is why I like our cases, simple and straight, any regular long action,
    falling block, etc, good for dozen or more heavy loadings.
    Here is picture of the M&G Mag .Ed


  11. #31
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Probably first 375 caliber cartridge made from 585HE necked down, the 375 Warlord.
    Guy did a real nice job, with what looks similiar to a Weatherby style shoulder.
    Kinda outdoes Weatherby & Cheytac. We have cases with no headstamps for wildcatters.
    First picture I got sent me today off of facebook and this one is from the great sniperforums.
     

     
    Another fellow is planning on shortening the 585HE to maybe 2.4", for use Marlins and Henrys,
    and other leverguns, redoing their 45-70s. With the belt they will have good headspace control.
    Without a rim that takes up circular space, say like our 24ga FH, but which is perfect for
    break actions like our 24ga FH in a Magtech...Ed


  12. #32
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Here is picture of 375 Warlord next to our 585 case he made it from.
    He is going to make couple later necked down to 416, and 458.
    There is another guy working on doing one necked down to 357 wildcat.

    Here is a picture of our poster Biebs on AR, 585 HE, in a MPI stock.
    He used a big Enfield action, with a fancy jeweled bolt.

    We found couple other big actions for our 585, that can even feed really
    long overall length loaded cases, like 4.5" long or more, if you are
    using long pointed bullets for real long range target and hunting work.
    One is Lawton 8000 Cheytac action, and the other is Stiller Cheytac actions
    made similiar, justa newer version. Both actions come in 1.45" diameter
    and a 1.60" diameter recievers.
    And Vestals Gunsmithing in Virginia does great work, decent prices, has
    these actions and will build you fancy 585 HEs. .. He has, working with
    another guys mag box setup, setup an extra long, good working, single
    stack, center feed, magazine..He has our 585 HE reamer on hand, we have
    barrels, cases, and reloading dies..Ed


  13. #33
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Here is couple different setups our guys checking for our 585HE
    in a long, Lawton Cheytac action. First laminated thumbhole stock.
    Second in a Hogue Compstock. The action can mount a scope rail
    like shown on the table in 1st picture or a receiver sight in 2nd picture.
    The scope rail is a piccatiny,. if you need long range work.


    The stocks used were wide ones for REM long actions, just add recoil
    block ahead of recoil inleting for the longer action, drill new screw hole
    Open the stock forward to original bolt hole for longer cases and mag.
    About Enfields for our case, one of my favorites, Some don't like the
    sporterizing, welding bottom metal straight. Many think straightening
    is a huge job needing special jigs, etc, Not really, just use one for a jig
    with a bolt, to weld on the straight extension, Do top weld, then cut old
    extension that is under off with a thin cutting wheel, then weld bottom.
    When we bolt the short piece on the one we are straightening, we grind
    the short slant off so the added piece lays on there flat.
    The one you cut off can be used as the top extension for the next one!!!
    Just keep on building...Ed


  14. #34
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Here is picture of another neat sporterizing deal for Enfields.
    On those without rear bridge pocket welded up, we just mill down
    and shape it so debth of the pocket matches bottom section of
    weaver rail and screw or epoxy it in. Shape to drive in hole tight.
    Can use as a rear scope ring mount or mount for peep sight
    like a compact UTG sight...

    If we have a welded up Enfield rear bridge, then we can use sight
    like on this gun a guy is doing. Has a rosewood laminate stock.
    He will have it checkered, sanded, with fancy finish.

    Here is a fancy stocked 24ga FH built on a NEF, built by
    a guy in Canada. Its straight back, high comp
    stock, handles recoil great... Ed

     
    More about 585 BB short case for lever guns, pistols,AR Uppers,
    Work in 71s, later 1886s, Henry steel frames made for 45-70.
    One guy is putting one in single shot action set up with
    Contender style pistol grip for testing in long rifle barrel,
    to simulate pistol recoil..Be very brisk recoil in a case
    that holds 110 gr powder under a light Minie bullet
    Maybe work in a Rossi Judge with heavy barrel.
    Or rolling block rifles and pistols....Ed

  15. #35
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Here is a picture from the back of a big Lawton action that
    our 585HE fits in nice. Scope rail on there is tapered
    for long range shooting.

    Here is what our wildcatter buddy is making from our
    585HE brass to see how they look and experiment with.
    He is getting reamers, dies, and gun setup first for the 375.
     

     
    In some ways big bore shotguns and rifles are sexy.
    By looking at the shape of the fire and smoke cloud....
    Thanks for picture, to the great NitroExpress Forums site.


  16. #36
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    A poster reading our threads said '' I'm slowly becoming a recoilapheliac''..
    That is neat term , and very glad that folks are catching the big bore fever.
    Here is a simple, yet neat peep sight we can use on the rear sporterized
    bridges of Enfields, works on other rear bridges also.Including shotguns.
    I like peep sights the best for most shooting. They also come with flat
    bottoms also for bridges and receivers that are flat on top.



    Another picture of the 585 HE one of our guys put in the MPI stock..


     
    On straight sided cases like our 585 HE the die set has a mouth expander
    die to make it easy to insert bullets. The die flares the mouth, but I always
    felt that doing what is really a relative relatively sharp flare, and then the slight
    roll crimping the same area of the case into a groove on the
    bullet or slug, shortens case life.
    So I just use expander plug out of the die, by hand, using just the bottom of
    of the expander plug and just push it in a little, wobble it around a small
    amount, bullet goes in ok, case mouths last longer, good for dozens of loads,
    with moderate hunting and target loads.Only takes a few seconds and less
    work that has to be done in the press ... Ed

     
     

  17. #37
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

     Here is video by Corlanes Sporting, Dawson Creek, BC, CAN.
    Known as, Rocky Mtn Rifles, video on Youtube of them testing our
    585 HE in a barreled action, they are building for a guy. They are
    shooting it into their big bullet trap with test load..
    https://www.youtube.com/watch?v=1vzQjRGfT1A
    Allan and Grant Swan in Australia are building 585HE for a guy,
    the second they built. First one killed the buff pictured earlier .
    AHR and Vestals will make folks here in US a 585 HE.
    Here is another view of a Lawton action big enough for 585HE..

     
    Here is picture of Rossi SS with 585 barrel mono-blocked into it,
    chambered for our 585 BB 2.17" case, to do testing in a light rifle
    with just pistol grip to simulate the case in pistols. Others going to
    put case in leverguns, autoloaders. We got plenty of cases Ed

     

  18. #38
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    The style of most break actions singles aren't the greatest, that we
    we used for 12ga FH, 10ga FH, other caliber barrels we mono-blocked
    in them like .585" bore for 585HE and 24ga FH.. One that is close
    to perfect that we have, is couple Magtechs we have in 24ga FH..


    Well the guys have found one that is super strong lockup and looks
    real nice. And has the good quality look. It comeswith 12ga light shot barrel,
    soon be monoblocked to rifled 24ga FH, the little brother of the 585HE.


    Told company if they did them NEF Ultra style, rifled, heavy, 12ga slug barrel,
    for the shotgun caliber only hunters, they couldn't make them fast enough.







    Here is picture of 585HE, In an Enfield that Bret and Darrel in Minn
    set up with great camo finish, with nice brake job. It is in a Hogue, recoil
    reducing, rubber coated, Compstock.Great job they did.. Ed





    Here is picture from the rear of the Enfield we mounted the short Weaver
    rail piece on. It is mounted in the sight pocket that the actions have;
    Can hold scope ring or a rear peep sight like UTG makes.. Ed



  19. #39
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    We will have arrived when we have this big bore in our back yard,
    Kind of a neat suppressor,







    Here is folder shotgun guys set up as 24ga FH.







    Here is another view of what we feel is a nearly perfect
    break action. Guy is making a strong 24ga FH with it.







    Here is picture of a 585HE MRC PH a guy set up..







    Here is picture of our shorter 585 BB for leverguns, etc,
    with a variety of bullets..Ed



  20. #40
    Member
    Join Date
    Oct 2006
    Location
    Brinton, MI
    Posts
    188

    Default

    Here is a Midland break action a guy is doing in 24ga FH.





    Here is old catalog picture of different stuff used in old days
    for shotgun loads. Some would be hairy in brass cases





    Here is picture of a MN a guy is doing 585HE in..
    It is singleshot. Redid bolt handle mounted it on the bolt
    further bac, so the port could be lengthened for our long case.
    Needs polishing and blueing, scope rail added.





    Here is another picture of the Enfield with great looking stock.
    Nice looking wood. Ed



Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •