14x7.5 Aluminum with 350 Dirrect Drive..>> Which Prop to use
I have a 14 X 7 1/2 foot aluminum boat.
I have been looking for a long time to find an affordable 2-1 reduction with no luck. So I am going to run it Dirrect rive for awhile so I can get to use it this year.
I have been looking & there are all kinds of different props that will work for D D 350 Chevy, but which would be the better for that aplication.
HP is about 300..
Any recomendations will help.
I have a 4 blade warp drive prop that I took off a DD 350 Chevy.
Call Skip Olsen in Fairbanks at 322-3291.
He will help you out with all your Q's. Odds are good he has the parts you need.
Also, I had a similar boat that I ran a master blaster 2 blade DD on a chevy 350. Your biggest issue will be getting the boat to perform in the right RPM range which is less than 3000 RPM's.
Give Me A Call I Have The Parts You Need And Can Help You With Any Questions You Have, 907-322-3291
Originally Posted by protaxidermy
Originally Posted by MacGyver
I forgot to mention I also have the ever thing needed to bolt the prop to a Chevy 350.