Results 1 to 9 of 9

Thread: S&W M&P Semi-Auto Pistols Quiz

  1. #1
    Member
    Join Date
    May 2012
    Location
    Lewisville Texas
    Posts
    17

    Default S&W M&P Semi-Auto Pistols Quiz

    S&W M&P Semi-Auto Pistols Quiz!

    I am semi-retired and I am taking a self-passed and self-taught Armorers course and now I am on the Ruger Double Action Revolvers. I hope to become a part-time light Gunsmith in the near future.

    There are over 60 quiz questions covering this firearm and I have answered most of them hopefully correctly but during my study and research I am having some problems related to some of the following quiz questions. I have conflicting answers.

    Can you help me determine the correct answers for these few quiz questions? Please correct my wrong answers!

    Thanks for your help.

    Note #10. Like other striker fired guns, the M&P's trigger must be pulled before taking the slide off of the frame. - True or False

    Note #11. The trigger safety engages what gun part and prevents it from moving, thus preventing the gun from being fired unless the finger is pulling the trigger?
    a) The hammer
    b) The striker
    c) The firing pin blocking safety
    d) The trigger bow (bar)

    Note #12. The trigger return spring pulls the trigger bar
    a) outward and down
    b) inward and down
    c) up and outward
    d) up and inward

    Note #13. What disconnects the trigger bar from the sear?
    a) The firing pin safety
    b) The trigger
    c) The shoulder of the extractor
    d) The lower portion of the rear sight
    e) The cam on the inside of the slide

    Note #14. What part moves the slide stop up when the magazine is empty?
    a) The ejector-
    b) The follower
    c) The slide tongue
    d) The slide cam

    Note #15. The manual thumb safety blocks what gun part?
    a) The sear
    b) The trigger
    c) The trigger bar (or bow)
    d) The striker

    Note #16. How many different parts make up the magazine?
    a) 1
    b) 3
    c) 5
    d) 7

    Note #17. In order to take the slide off of the frame, the slide must be pulled rearward and
    the takedown lever must be pulled
    a) up
    b) down
    c) out

    Note #18. The recoil spring coil binds. - True or false

  2. #2
    Member
    Join Date
    Jul 2011
    Location
    Anchorage
    Posts
    1,121

    Default

    This is getting rather tiresome! If you are seeking information- try looking it up. Otherwise at least change the subject and titles to match what you are looking (cheating) for. Unless this is just a troll job you are doing.....

  3. #3
    Moderator LuJon's Avatar
    Join Date
    Mar 2007
    Location
    Palmer, AK
    Posts
    11,415

    Default

    I just did a google search for "I am semi-retired and I am taking a self-passed and self-taught Armorers course" and found that this is being posted on dozens of firearms forums repeatedly. I have no further interest in supporting it here.

    It seems that he has actually contributed a small amount of response to similar questions at the following link. I would suggest that cloud knowledge should not be considered a substitute for personal knowledge when the goal isn't to learn the info but rather to find specific test answers. There are many ways to actually learn this info, and plenty of them are online and free.

    http://www.firearmstalk.com/forums/f25/h-k-mp5-sub-machine-gun-final-6-test-quiz-questions-65777/#post827180

  4. #4
    Member
    Join Date
    May 2012
    Location
    Lewisville Texas
    Posts
    17

    Default

    Quote Originally Posted by LuJon View Post
    I just did a google search for "I am semi-retired and I am taking a self-passed and self-taught Armorers course" and found that this is being posted on dozens of firearms forums repeatedly. I have no further interest in supporting it here.

    It seems that he has actually contributed a small amount of response to similar questions at the following link. I would suggest that cloud knowledge should not be considered a substitute for personal knowledge when the goal isn't to learn the info but rather to find specific test answers. There are many ways to actually learn this info, and plenty of them are online and free.

    http://www.firearmstalk.com/forums/f25/h-k-mp5-sub-machine-gun-final-6-test-quiz-questions-65777/#post827180
    Yes you will find many postings on the net. There are many diferent firearms in this cource and not all forums will help me on the questions that Ia m have problems with. After I complete this course I will be working with an experience gunsmith.

  5. #5
    Member
    Join Date
    May 2012
    Location
    Lewisville Texas
    Posts
    17

    Default

    I have tried and stillI have conflicting answers. I have many books and DVD. Not as smart as you. I do change the titles for each firearm in the course.

  6. #6
    Member
    Join Date
    May 2012
    Location
    Lewisville Texas
    Posts
    17

    Default

    Quote Originally Posted by hoppy70 View Post
    S&W M&P Semi-Auto Pistols Quiz!

    I am semi-retired and I am taking a self-passed and self-taught Armorers course and now I am on the S&W M&P Semi-AutoPistols. I hope to become a part-time light Gunsmith in the near future.

    There are over 60 quiz questions covering this firearm and I have answered most of them hopefully correctly but during my study and research I am having some problems related to some of the following quiz questions. I have conflicting answers.

    Can you help me determine the correct answers for these few quiz questions? Please correct my wrong answers!

    Thanks for your help.

    Note #10. Like other striker fired guns, the M&P's trigger must be pulled before taking the slide off of the frame. - True or False

    Note #11. The trigger safety engages what gun part and prevents it from moving, thus preventing the gun from being fired unless the finger is pulling the trigger?
    a) The hammer
    b) The striker
    c) The firing pin blocking safety
    d) The trigger bow (bar)

    Note #12. The trigger return spring pulls the trigger bar
    a) outward and down
    b) inward and down
    c) up and outward
    d) up and inward

    Note #13. What disconnects the trigger bar from the sear?
    a) The firing pin safety
    b) The trigger
    c) The shoulder of the extractor
    d) The lower portion of the rear sight
    e) The cam on the inside of the slide

    Note #14. What part moves the slide stop up when the magazine is empty?
    a) The ejector-
    b) The follower
    c) The slide tongue
    d) The slide cam

    Note #15. The manual thumb safety blocks what gun part?
    a) The sear
    b) The trigger
    c) The trigger bar (or bow)
    d) The striker

    Note #16. How many different parts make up the magazine?
    a) 1
    b) 3
    c) 5
    d) 7

    Note #17. In order to take the slide off of the frame, the slide must be pulled rearward and
    the takedown lever must be pulled
    a) up
    b) down
    c) out

    Note #18. The recoil spring coil binds. - True or false
    Corrected an error in the text!

  7. #7
    Member
    Join Date
    May 2012
    Location
    Lewisville Texas
    Posts
    17

    Default

    Quote Originally Posted by hoppy70 View Post
    S&W M&P Semi-Auto Pistols Quiz!

    I am taking a self-passed and self-taught Armorers course and now I am on the Ruger Double Action Revolvers. I hope to become a part-time light Gunsmith in the near future.

    There are over 60 quiz questions covering this firearm and I have answered most of them hopefully correctly but during my study and research I am having some problems related to some of the following quiz questions. I have conflicting answers.

    Can you help me determine the correct answers for these few quiz questions? Please correct my wrong answers!

    Thanks for your help.

    Note #10. Like other striker fired guns, the M&P's trigger must be pulled before taking the slide off of the frame. - True or False

    Note #11. The trigger safety engages what gun part and prevents it from moving, thus preventing the gun from being fired unless the finger is pulling the trigger?
    a) The hammer
    b) The striker
    c) The firing pin blocking safety
    d) The trigger bow (bar)

    Note #12. The trigger return spring pulls the trigger bar
    a) outward and down
    b) inward and down
    c) up and outward
    d) up and inward

    Note #13. What disconnects the trigger bar from the sear?
    a) The firing pin safety
    b) The trigger
    c) The shoulder of the extractor
    d) The lower portion of the rear sight
    e) The cam on the inside of the slide

    Note #14. What part moves the slide stop up when the magazine is empty?
    a) The ejector-
    b) The follower
    c) The slide tongue
    d) The slide cam

    Note #15. The manual thumb safety blocks what gun part?
    a) The sear
    b) The trigger
    c) The trigger bar (or bow)
    d) The striker

    Note #16. How many different parts make up the magazine?
    a) 1
    b) 3
    c) 5
    d) 7

    Note #17. In order to take the slide off of the frame, the slide must be pulled rearward and
    the takedown lever must be pulled
    a) up
    b) down
    c) out

    Note #18. The recoil spring coil binds. - True or false
    Added some of my answers!

  8. #8
    Member Bsj425's Avatar
    Join Date
    Oct 2009
    Location
    North Pole, Alaska
    Posts
    1,060

    Default

    #14= follower

    #16=3

  9. #9
    Member
    Join Date
    May 2012
    Location
    Lewisville Texas
    Posts
    17

    Default

    Note #10. Like other striker fired guns, the M&P's trigger must be pulled before taking the slide off of the frame. - True or False

    Note #11. The trigger safety engages what gun part and prevents it from moving, thus preventing the gun from being fired unless the finger is pulling the trigger?
    a) The hammer
    b) The striker
    c) The firing pin blocking safety
    d) The trigger bow (bar)

    Note #12. The trigger return spring pulls the trigger bar
    a) outward and down
    b) inward and down
    c) up and outward
    d) up and inward

    Note #13. What disconnects the trigger bar from the sear?
    a) The firing pin safety
    b) The trigger
    c) The shoulder of the extractor
    d) The lower portion of the rear sight
    e) The cam on the inside of the slide

    Note #14. What part moves the slide stop up when the magazine is empty?
    a) The ejector-
    b) The follower
    c) The slide tongue
    d) The slide cam

    Note #15. The manual thumb safety blocks what gun part?
    a) The sear
    b) The trigger
    c) The trigger bar (or bow)
    d) The striker

    Note #16. How many different parts make up the magazine?
    a) 1
    b) 3
    c) 5
    d) 7

    Note #17. In order to take the slide off of the frame, the slide must be pulled rearward and
    the takedown lever must be pulled
    a) up
    b) down
    c) out

    Note #18. The recoil spring coil binds. - True or false

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •